Turbo Chef Technologies Residential Single and Double Wall Oven service manual Theory of Operation

Theory of Operation

The TurboChef® Residential Speedcook oven combines high-speed forced air impingement and microwave energy to cook food up to 15 times faster than a conventional oven. The re-circulating air transfers heat to the food and then passes through a catalytic converter where excess grease and odors are removed and combusted. Simultaneously, precise bursts of microwave energy cook the food from the inside out. This combination of heating technologies quickly cooks food and seals moisture to help ensure chef-quality results in a fraction of the time.

This manual includes instructions for servicing, troubleshooting, installing, cleaning, and operating the TurboChef Residential double and single wall ovens. If you have questions not addressed in this manual, contact Technical Service (866.447.3783, +1 214-379-6000) or your Authorized Distributor.

Catalytic Converter

The catalytic converter removes odors and grease from the air inside the cook cavity. It is also responsible for limiting and removing any smoke from the cavity in case of a spill. Do not use oven cleaner when cleaning the Speedcook oven, as the catalyst can become damaged by the use of caustic cleaners, resulting in a non-warranty service call. See pages 2.10, and 3.4 for approved self-cleaning instructions.

Certifications

cETLus

Electrical Specifications

Phase: Single

Frequency: 60 Hz

Current: 50 amp (DWO) / 30 amp (SWO)

Cord: 4-wire (inc. ground)

Voltage: 208 or 240 (depending on model)

Connection: 5½ ft flex conduit

Total Connected Power: 50 amp (DWO) / 30 amp (SWO)

NOTE: Unit includes a 5½-ft flex conduit to be used between the oven and conduit box. Connectors are supplied by the installation electrician.

NOTE: Branch circuit MUST be protected with a 50-amp (Double Wall Oven) or 30-amp (Single Wall Oven) over-current protector.

CAUTION: If there is a high leg in supply voltage, ensure it is not on L2. Having it present on L2 will damage critical 120V oven components.

1.1

SPECIFICATIONS AND INSTALLATION