Turbo Chef Technologies Residential Single and Double Wall Oven Mode 8 100% Complete

-Brown Less: Select if the outside of the dish is browning faster than desired.

-Cook and Brown Less: Select if dish is cooking and browning more than expected, but requires additional cooking time.

If after 30 seconds the oven has not been addressed (door opened or inner CookWheel knob pressed), the oven will complete the cook cycle according to the original settings.

NOTE: For food items with a cook time of 2:30 or less, the cook cycle does not pause at the 80% complete mark.

NOTE: If the food item is done at this time, remove it from the oven and press cancel to end the cook cycle. If you end the cook cycle at this point, the cook cycle will not be recorded in “View Last Cooked (10)” (for more information on “View Last Cooked (10), see page 2.3).

Happens When...

- The cook cycle is 80% complete.

Goes To...

-mode 2 if the user presses cancel.

-mode 8 after 30 seconds of inactivity, or if the user selects “No Change,” “Cook Less,” “Brown Less,” or “Cook and Brown Less.”

Mode 8: 100% Complete

Mode during which the cook cycle is 100% complete. At the end of a cook cycle, a chime sounds notifying the user that the food item is done. The user has the option to add additional cook time, if desired. At this point in the cook cycle, the user can choose one of the following four options:

- Cook More: Select if the outside meets expecta- tions, but the inside needs to cook longer.

-Brown More: Select if the inside meets expectations, but outside needs to cook longer.

-Cook and Brown More: Select if both the inside and outside need to cook longer.

-Done Cooking this Dish: Select if no adjustments are needed.

NOTE: If the user selects “Cook More,” “Brown More,” or “Cook and Brown More,” the user can add up to 30% of the original cook time in 5-second increments. This can be repeated as many times as necessary.

This option is available for 3 minutes. After 3 minutes of inactivity, the oven assumes the item is done.

Happens When...

- The cook cycle is 100% complete.

Goes To...

-mode 9 if the user selects “Done Cooking this Dish.”

-mode 6 if the user selects one of the “cook/ brown more” options.

Mode 9: Remove Food from Oven

Mode during which cooking is complete, and the food item is ready to be removed from the oven. The user has the option to “Save to Favorites,” “Cook Another,” or “Done.”

WARNING: Dish and inside of oven/oven door are hot! Use extreme caution.

NOTE: The display will not change until “Save to Favorites,” “Cook Another,” or “Done” is selected or until the oven is turned off.

Happens When...

-The user selects “Done Cooking this Dish” from mode 8.

Goes To...

-mode 1 if the user turns the CookWheel to off.

-mode 2 if the user selects “Done.”

-mode 5 if the user selects “Cook Another.”

-Save to Favorites (see page 2.9), if the user selects “Save to Favorites.”

NOTE: If the user selects “Cook Another,” the next cook cycle will use the same settings as the previous cook cycle. This includes any adjustments made at any point during the previous cook cycle.

2.7

OVEN CONTROLS AND COOKING - THE SPEEDCOOK OVEN