Turbo Chef Technologies Residential Single and Double Wall Oven service manual

A.16 APPENDIX - REPLACING OVEN COMPONENTS

Upper Electrical Compartment, DWO Gen 2 and SWO

DANGER: Before removing or replacing any oven component, ensure the oven is removed from any power source (i.e., the breaker is turned off). Failure to do so can result in serious injury or death.

WARNING: Before removing or replacing any oven component, thoroughly read the safety instructions found at the front of this manual and in Oven Systems (Section 5) and Troubleshooting (Section 6). Adhere to all precautions and warnings outlined in these sections, as failure to do so could result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

Differentiating Between DWO Gen 1 and DWO Gen 2

Use the serial number to tell if the oven being serviced is a DWO Gen 1 or DWO Gen 2 oven. To view the serial number, open the Speedcook oven door and locate the serial plate (between the Speedcook oven door’s hinges). If the serial number’s first five characters are “TDO2D” (or “TSO2D” for SWO models), the oven is a Gen 2 oven. If the first five characters are NOT “TDO2D” (or “TSO2D”), the oven is a DWO Gen 1 oven.

If the oven being serviced is a DWO Gen 1 oven proceed to page A.14 for that model’s upper electrical compartment illustrations.

Item Description	Item Part #	Hardware Description	Hardware Part Number(s)
Blower, Dual	104164	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
Cable, Display, Upper	RWD-9438	None	None
Cable, Interconnect, Relay Board	RWD-9542	None	None
Controls Assembly, Gen 2	N/A	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x5)
(see pages A.18-A.19)
Cooling Fan, EC, Upper	104114	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x3)
Cord, Power	RWD-9412	None	None
Duct, Mag Cooling, LHS	RWD-9374	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x3)
Duct, Mag Cooling, RHS	RWD-9373	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x3)
EMI Filter	104211	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
Harness, Clock, Gen 2	RWD-9543	None	None
Harness, L.V., Upper Oven, Gen 2	RWD-9540	None	None
Harness, Power, Motor Controller	RWD-9559	None	None
Harness, Wire, Gen 2	RWD-9538	None	None
Heater Cover Plate	RWD-9156	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x8)
		Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
High Limit Switch	102075	Bracket, Hi Limit	RWD-9388
		Screw, M4X 0.7 x 8, PPHD, INT Tooth, SS	101672 (x2)
Mag Air Diverter Assembly,	N/A	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
Gen 2 (see page A.20)
Magnetron	104154	Nut, Hex Flanged, M5, Yellow Zinc	101001 (x4)
Relay/Power Assembly	N/A	Screw, #8-32 x 5/8 LG, SEMS, PPHD, SS	102926 (x2)
(see page A.21)
Snubber, Electrical	RWD-9497	None	None
Stirrer Motor, Gear	104174	Screw, M3 x 8mm LG, PPHD, S.S.	101668 (x2)
Stirrer Motor, Hub	104175	None	None