Turbo Chef Technologies Residential Single and Double Wall Oven service manual

Oven Over Temperature	6.4
Component Testing and Troubleshooting	6.4
Control System	6.4
Clock Assembly	6.4
Control Board	6.4
CookWheel Control (Speedcook Oven)	6.4
EMI Filter	6.5
Oven Mode Switch (Lower Oven)	6.5
Power Supply, 12 VDC	6.5
Power Supply, 24 VDC	6.5
RTD	6.6
Transformer, 12 VAC (Gen 1)	6.6
Transformer, 12 VAC (Gen 2)	6.6
Halogen Light System	6.7
Light Switch, Control Panel (Manual)	6.7
Light Switch, Speedcook Oven (Door Actuated)	6.7
One Speedcook Oven Light is Out	6.7
Both Speedcook Oven Lights are Out	6.7
Both Speedcook Oven and Both Lower Oven Lights are Out (Double Wall Oven)	6.7
Cooling System	6.7
Cooling Fan Overview (Gen 1)	6.7
Cooling Fan Overview (Gen 2)	6.8
Troubleshooting Cooling Fans (Gen 1)	6.8
Troubleshooting Cooling Fans (Gen 2)	6.9
Air Impingement Systems	6.9
Blower Motors, Speedcook Oven	6.9
Convection Fan, Lower Oven	6.10
Microwave System	6.10
Testing a Capacitor	6.10
Testing a High-Voltage Diode	6.10
Testing a High-Voltage Transformer	6.11
Testing a Magnetron for an Open/Shorted Filament	6.11
Heating System, Speedcook Oven	6.11
Heater Element, Speedcook Oven	6.12
No Heat	6.12
Oven is Heating up Very Slowly	6.12
Testing for Control Voltage to the K1 SSR	6.12
Testing for Control Voltage to the K8 Relay (Gen 1)	6.13
Testing Relay 14 (Pre-Heat) Operation (Gen 2)	6.13
Testing for a K9 Relay that is Stuck Open	6.13
Testing for a K1 SSR that is Stuck Open	6.13
Heating System, Lower Oven	6.13
Lower Oven Heating Element Specifications	6.14
No Heat/Slow to Heat	6.14
Testing for Voltage to the K11 SSR	6.14
Testing for Voltage to the K12 SSR	6.14
Testing for a K11 SSR that is Stuck Open	6.15
Testing for a K12 SSR that is Stuck Open	6.15
Testing for a K13 Relay that is Stuck Open	6.15