Turbo Chef Technologies Residential Single and Double Wall Oven service manual

A.20 APPENDIX - REPLACING OVEN COMPONENTS

Mag Air Diverter Assembly Detail, DWO Gen 1, DWO Gen 2, and SWO

DANGER: Before removing or replacing any oven component, ensure the oven is removed from any power source (i.e., the breaker is turned off). Failure to do so can result in serious injury or death.

WARNING: Before removing or replacing any oven component, thoroughly read the safety instructions found at the front of this manual and in Oven Systems (Section 5) and Troubleshooting (Section 6). Adhere to all precautions and warnings outlined in these sections, as failure to do so could result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

Item Description	Item Part # Hardware Description		Hardware Part Number(s)
		Bracket, Capacitor	104197
Capacitor, H.V.	100213	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
		Screw, #6-32 x 1/2 LG, PPH, SS	101570
		Nut, #6-32, Serr Hex FLNG, SS	100902
Diode, H.V.	100481	Screw, #8 x 1/2, PHPH, PLT	101689 (x2)
Relay, K9	104179	Screw, #6 x 1/2, PPHD, DRL-PT, SS	101687 (x2)
Thermostat, 140F, Close on Rise	102087	Screw, #6 x 1/2, PPHD, DRL-PH, SS	101687 (x2)
Thermostat, 140F, Close on Rise
Capacitor, H.V.

Relay, K9

Diode, H.V.

Figure A.13: Mag Air Diverter Assembly Detail, DWO Gen 1

Thermostat, 140F, Close on Rise

Capacitor, H.V.

Diode, H.V.

Figure A.14: Mag Air Diverter Assembly Detail, DWO Gen 2 and SWO