Turbo Chef Technologies Residential Single and Double Wall Oven Speedcook Oven Controls, Display

1 2 3

Figure 2.1: Oven Controls

Speedcook Oven Controls

1. Analog Clock and Timer

The clock and timer run with advanced electronic control knobs. To operate, see 2. Set Clock Knob and 3. Set Timer Knob.

2. Set Clock Knob

To set the time,

1.Press knob to extend.

2.Turn knob to set time.

3.Press knob back in to original position.

3. Set Timer Knob

To set the timer,

1.Press knob to extend.

2.Turn knob to set timer – up to 60 minutes.

3.Press knob back into original position.

NOTE: The timer does not begin counting down until the knob is pressed back in. The oven will chime four times at the end of the timer cycle.

4. Cook Navigator™

Consists of the Display (5), Start Key (9), Back Key (10), Cancel Key (11), and Info Key (12).

5. Display

The display shows information relevant to the current oven operation and/or user options.

6. CookWheel™ (inner knob)

Turn to navigate through the options on the display. Press knob to select an option, begin a preheat cycle, or initiate a cook cycle.

4 5 6 7

12 11 10 9 8

7. CookWheel™ (outer knob)

Turn to select a Speedcook mode, Self-Clean, or to turn the oven off. Modes include: Air-Crisp, Bake, Broil, Favorites, Dehydrate, Roast, and Toast.

8. Oven Light Switch

Press to illuminate the top cook cavity.

9. Start Key

Press to select an option, begin a preheat cycle, or initiate a cook cycle.

NOTE: Pressing the “Start” key performs the same function as pressing in the inner CookWheel knob.

10. Back Key

Press to return to the previous screen.

11. Cancel Key

Press to terminate a cook cycle or to return to the main screen.

12. Info Key

Press to display information on the Oven Setup (sound, units & measurements, display, and software updates), Help Topics, and Oven Tips.

NOTE: When the oven is in the middle of a cook cycle, you will not be able to access the Info screen.

2.1

OVEN CONTROLS AND COOKING - THE SPEEDCOOK OVEN