2.6OVEN CONTROLS AND COOKING - THE SPEEDCOOK OVEN
Happens When...
-The user turns the CookWheel to
-The user presses cancel from mode 7.
-The user selects “Done” from mode 9.
Goes To...
-mode 3 when the user selects the desired food item and item specifications.
Mode 3: Confirm Settings
Mode during which the user either confirms the suggested cook settings, or chooses to adjust the cook settings (for more information on adjusting cook settings, see page 2.8).
Happens When...
-When the user selects the desired food item and item specifications from mode 2.
Goes To...
-mode 4 when the user selects the “Begin Preheat” option.
-Adjust Settings when the user selects the “Adjust Settings” option (for more information on adjusting cook settings, see page 2.8).
Mode 4: Preheat
Mode during which the oven preheats to the set temperature. The oven automatically begins counting down the remaining preheat time and displays the current temperature. Preheating will take approximately
Happens When...
-The user selects the “Begin Preheat” option from mode 3.
Goes To...
-mode 5 when the oven chimes, indicating that the preheat cycle is complete.
NOTE: If the door is opened while the oven is preheating, the oven displays the message “The oven door is open. You must close the oven door before continuing.” If applicable, the air will power down to 30%.
Mode 5: Ready to Cook
Mode during which the oven is ready to cook a food item. Place the food into the oven at this time. Press start to begin the cook cycle.
WARNING: Inside of oven and oven door are hot! Use extreme caution.
Happens When...
-The oven has reached the set temperature. The oven will chime, indicating it is ready to cook.
-The user selects “Cook Another“ from mode 9.
Goes To...
- mode 6 when the user presses start.
Mode 6: Cooking
Mode during which the oven cooks a food item.
NOTE: To immediately terminate cooking, turn the CookWheel to off.
NOTE: The oven door must be completely closed before the oven will initiate a cook cycle. If the door is opened while the oven is cooking, the oven displays the message “The oven door is open. You must close the oven door before continuing.” If applicable, the microwave system shuts off and the air will power down to 30%.
Happens When...
- The user presses start from mode 5.
Goes To...
-mode 7 when the cook cycle is 80% complete (if the cook cycle exceeds 2:30).
-mode 8 if the cook cycle is less than 2:30.
Mode 7: 80% Complete
Mode during which the cook cycle is 80% complete. When the cook cycle is 80% complete, a chime sounds, the cook cycle pauses, and the user has the option to check the food and, if desired, adjust the cook settings. At this point in the cook cycle, the user can choose one of the following four options:
-No Change: Select if dish is cooking to expectations.
-Cook Less: Select if product is overcooking or internal temperature is too high.
