Turbo Chef Technologies Residential Single and Double Wall Oven service manual

A.18 APPENDIX - REPLACING OVEN COMPONENTS

Controls Assembly Detail, DWO Gen 1, DWO Gen 2, and SWO

DANGER: Before removing or replacing any oven component, ensure the oven is removed from any power source (i.e., the breaker is turned off). Failure to do so can result in serious injury or death.

WARNING: Before removing or replacing any oven component, thoroughly read the safety instructions found at the front of this manual and in Oven Systems (Section 5) and Troubleshooting (Section 6). Adhere to all precautions and warnings outlined in these sections, as failure to do so could result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

Item Description	Item Part #	Hardware Description	Hardware Part Number(s)
Clock Transformer	104139	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
Control Board, Gen 1	RWD-3003	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911 (x4)
Control Board, Gen 2	RWD-3015	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911 (x4)
Fuse, 15 Amp, Gen 2	100602	None	None
Fuse, 20 Amp, Gen 2	100603	None	None
Power Supply (12VDC)	104128	Screw, PPH, SS, 4-4OUNC x .25 LG	101520 (x4)
Power Supply (24VDC)	104166	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911 (x3)
Power Supply Assembly	N/A	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)
Power Supply Mounting Plate	RWD-9262	None	None
Relay Board	RWD-9545-FRU	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911 (x4)
SD Card, Gen 1	RWD-9500	None	None
SD Card, Gen 2	RWD-9562	None	None
Speaker	104214	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688 (x2)