Turbo Chef Technologies Residential Single and Double Wall Oven service manual

Relay and Relay/Power Assembly Detail, DWO Gen 1, DWO Gen 2, and SWO

DANGER: Before removing or replacing any oven component, ensure the oven is removed from any power source (i.e., the breaker is turned off). Failure to do so can result in serious injury or death.

WARNING: Before removing or replacing any oven component, thoroughly read the safety instructions found at the front of this manual and in Oven Systems (Section 5) and Troubleshooting (Section 6). Adhere to all precautions and warnings outlined in these sections, as failure to do so could result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

Item Description	Item Part #	Hardware Description	Hardware Part Number(s)
M.O.V. Filter	RWD-9490	Standoff, #6-32 x 5/8, F/F, PLTD	101951 (x3)
		Screw, #6-32 x 1/4 LG, PPH, SS	101565 (x3)
Relay, K1	101281	Screw, #8-32 x 3/8, PPH, THD-Forming, PLT	104227 (x2)
Relay, K2	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K3	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K4	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K5	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K6	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K7	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K8	101273	Nut, #6-32, SERR HEX FLNG, SS	100902 (x2)
Relay, K9	104179	Screw, #6 x 1/2, PPHD, DRL-PT, SS	101687 (x2)
Terminal Block	104145	Screw, #8 x 3/4, PPHD, PLT-STL	104178 (x2)

Relay, K6

Relay, K7

Relay, K8

			Relay, K9
Relay, K3	Relay, K4	Relay, K5	Terminal Block
			Relay, K1
Relay, K1 Relay, K2			M.O.V. Filter
Figure A.15: Relay Assembly Detail, DWO Gen 1			Figure A.16: Relay/Power Assembly Detail, DWO Gen 2 and SWO

A.21

APPENDIX - REPLACING OVEN COMPONENTS