Land Pride DT55 Ripper Option Assembly, Skid Shoe Option Assembly, Gauge Wheel Option Assembly

Land Pride Table of Contents

Section 1: Assembly and Set-Up

Ripper Option Assembly

Refer to Figure 1-6:

1.Assemble ripper Assembly (#1) to the main frame with four 3/4” u-bolts (#2), lock washers (#3) and 3/4” nuts (#4). Tighten nuts to 170 ft-lbs. of torque.

20520

Ripper Option Assembly

Figure 1-6

Skid Shoe Option Assembly

Refer to Figure 1-7:

1.Attach Skid Shoe (#1) to the main frame with 3/8”-16 x 1 1/4” GR5 round head square neck bolt s (#2) and lock nuts (#3). Draw lock nuts up snug, do not tighten.

2.Attach one end of turnbuckle (#5) to the main frame lug with clevis pin (#6) and cotter pin (#4).

3.Attach other end of turnbuckle (#5) to the lug on the skid shoe (#1) lug with clevis pin (#6) and cotter pin (#4).

4.Bend one leg of each cotter pin to keep cotter pin from falling out.

Gauge Wheel Option Assembly

Refer to Figure 1-8:

1.Assemble Gauge Wheel Assembly (#1) with hitch pin (#2) and hair pin (#3).

25754

Skid Shoe Option Assembly

Figure 1-7

20519

Gauge Wheel Option Assembly

Figure 1-8

3/17/08 DT55 & DTM55 Powered Ditchers 324-053M 11