Black & Decker FS110L instruction manual Carton Contents, Assembly

CARTON CONTENTS

1

Fig. 1

1.Miter Saw

2.Dust Bag

3.Clamp

4.5mm Hex Wrench

5.1/8” Hex Wrench

6.1/2” Blade Wrench

2

3

4

6 5

Fig. 2

Remove the miter saw and all loose items from the carton.

Lifting the miter saw by the switch handle can cause misalignment. Always lift the machine by the base or the carrying handle.

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

(Supplied)

*5mm hex wrench

*1/8” hex wrench

*1/2” blade wrench (Not supplied)

*Phillips head screwdriver

*A square to make adjustments

For your own safety, do not connect the machine to the power source until the machine is completely assembled, and you read and understand the entire instruction manual.

ROTATING TABLE

Loosen the table-lock handle one or two turns. Raise the index lever (B) Fig. 3 and rotate the table to the desired position. Tighten the table-lock handle (A) Fig. 3.

B

Fig. 3

A

MOVING CUTTINGHEAD TO THE UP POSITION

1.Push down on the cuttinghead and pull out the cuttinghead lock knob (A) Fig. 4.

2.Move the cuttinghead to the up position.

A

Fig. 4

7