Turbo Chef Technologies Residential Single and Double Wall Oven Control Housing Detail

A.12 APPENDIX - REPLACING OVEN COMPONENTS

Control Housing Detail

DANGER: Before removing or replacing any oven component, ensure the oven is removed from any power source (i.e., the breaker is turned off). Failure to do so can result in serious injury or death.

WARNING: Before removing or replacing any oven component, thoroughly read the safety instructions found at the front of this manual and in Oven Systems (Section 5) and Troubleshooting (Section 6). Adhere to all precautions and warnings outlined in these sections, as failure to do so could result in serious injury or death.

CAUTION: Before removing/installing any component, make sure it is disconnected from the wire harness (where applicable).

Item Description	Item Part #	Hardware Description	Hardware Part Number(s)
Bracket, Control Assembly	RWD-9367	Screw, #8-32 x 3/8, PPHD, INT SEMS, SS	102921	(x2 each)
Clock Assembly	RWD-9253	Screw, #8-32 x 3/8, PPHD, INT SEMS, SS	102921	(x4)
Clock Ring Gasket	RWD-9450	None	None
Control Housing, Upper	RWD-9046	None	None
CookWheel Knob, Inner	RWD-9378	None	None
CookWheel Knob, Outer	RWD-9377	None	None
CookWheel Support Plate	RWD-9455	None	None
CookWheel Switch Assembly	RWD-9256	Screw, #8-32 x 5/8 LG, SEMS, PPHD, SS	102926	(x2)
Display Assembly, Upper, TFT	RWD-9294	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911	(x4)
Light Switch	104141	Screw, #6-32 x 3/8, INT TOOTH, PPH, SS	102911	(x2)
Speaker	104214	Screw, SH MTL, #8 x 1/2 Serrated PHTRH	101688	(x2)
		Bracket, Speaker	RWD-9567

Bracket, Control Assembly Display Assembly, Upper, TFT Clock Assembly

	Control Housing, Upper		Bracket, Control Assembly
Light Switch
	CookWheel Switch Assembly	Clock Ring Gasket
CookWheel	CookWheel Knob, Inner
Support Plate
CookWheel Knob, Outer

Figure A.5: Control Housing Detail, DWO Gen 1