Auto Preset
1.Press BAND to select the desired band.
2.Hold down MEMORY for about 3 seconds.
3.The tuner automatically begins scanning, and stores the first 30 strong signals it receives.
4.Scanning stops automatically after radio stations have been stored in the auto preset memory.
Note: Press MEMO again to stop auto scanning earlier.
To store stations on the other band, repeat Steps
Listening to Preset Stations
To listen to a radio station stored in the station memory, press TUN- ING MODE then TUNING/PRESET ) or
Switching Between Preset Stations and Manual Tuning
If you store preset stations, pressing TUNING/PRESET ) or - scrolls through the preset stations, rather than changing the frequen- cy station by station.
To switch to scrolling by individual stations, press TUNING MODE, then repeatedly press TUNING/PRESET ) or - quickly to change the frequency by one step. Or hold down TUNING/PRESET : or ; to tune to the next clear station.
To switch back to scrolling through the preset stations, press TUNING MODE, then repeatedly press TUNING/PRESET ) or - until you reach the desired station.
CONTROLLING THE CD PLAYER
You can use the receiver’s
Important: You can only use audio CDs and some
1.Press POWER.
2.Press DVD.
3.On the receiver, press DISC 1, DISC 2, or DISC 3 to open the desired drawer.
4.Place the desired CDs in the tray, then press the appropriate DISC button again to close the drawer.
Note: If you want to load more than one CD, you can press another DISC button. The receiver closes the open drawer and opens the drawer of the DISC button you pressed.
5.To select a CD, repeatedly press DISC SKIP until the desired CD’s number blinks.
6.To play, press BAND/7.
To pause playback, press (pause icon). To resume playback, press (pause icon) again or press BAND/7.
To move forward through a track, hold down TUNING/PRESET - for about 2 seconds. Repeat up to two times to increase the fast- forward speed. To resume playback, press BAND/7.
To move backward through a track, hold down TUNING/PRESET
)for about 2 seconds. Repeat up to two times to increase the rewind speed. To resume playback, press BAND/7.
Note: At the beginning or end of a track on an audio CD, the scan speed returns to normal.
To skip to the next track on the CD, press TUNING/PRESET - once.
To return to the beginning of the current track, press TUNING/ PRESET ).
To return to the previous track, press TUNING/PRESET ) twice.
To stop playback, press FM MODE/ '. The disc icon stops rotat- ing, and H;IKC; appears. To resume playback, press BAND/7. To stop playback completely, press FM MODE/ ' again.
Changing the Sound Mode
For a surround mode, repeatedly press SURROUND until the desired mode (J>;7J;H, >7BB, IJ7:?KC, IJ;H;E, or FHEýBE=?9) appears.
Note: Dolby Digital and DTS modes do not work with CDs.
Using GUI Menu Icons
GUI menu icons show the current track number and elapsed time of a CD. Some icons only show the indicated information. Other icons al- low the settings to be changed.
Important: You must turn on your television to view the GUI menu icons.
Follow these steps to view or change GUI information.
1.Press GUI during playback. Icons of the current track number and the elapsed time appear.
2.Press the remote’s 6 or 7 to select the desired item. The cur- rently selected item is highlighted.
The first icon is the track icon. If you select it, you can jump to the
desired track number by pressing the number keys and ENTER, or by pressing ) or
The second icon is the time icon. It shows the elapsed time. You cannot change it. It is only for viewing.
Repeat Play
Press REPEAT during playback. Each time you press this button, the TV screen displays the repeat mode setting and the disc will repeat a track.
The repeat mode changes between H;F;7JýED;, H;F;7Jý7BB, H;F;7J 7BBý:?I9I, and H;F;7JýE<< as you press the button.
To return to normal play, press REPEAT several times until H;F;7JýE<< appears.
Note: Repeat play works only with discs for which the elapsed play- ing time appears in the display window during playback.
Remote Control Operation | 15 |