ˆDVD Player Operation
BASIC PLAYBACK
1.Press POWER. The last selected function appears.
2.If necessary, press the remote’s DVD or rotate the receiver’s FUNCTION until DVD appears.
3.Press DISC 1, DISC 2, or DISC 3 to open the desired disc tray. EF;D appears and the corresponding disc indicator (1, 2, or 3) flashes.
Note: The disc indicator 1, 2, or 3 lights even the disc is not in
the tray until the unit check the tray after the receiver’s PLAY or the remote’s BAND/7is pressed.
4.Place a disc on the disc tray with the playback side down. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction.
Notes:
•If you leave the disc tray open for more than 8 minutes, the disc tray automatically closes.
•If you leave the disc tray open, the disc tray automatically closes when the function mode is changed.
5.Press the receiver’s PLAY or the remote’s BAND/7. FB7O appears. The disc tray automatically closes and the receiver loads the disc. After loading the disc, the receiver enters menu mode.
Note: If you close the tray by pressing DISC 1, DISC 2, or DISC 3, the receiver does not load the disc. Press PLAY to load the disc.
6.To select another disc, repeatedly press DISC SKIP on the remote or the receiver until the desired disc loads.
Note: After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen.
7.When the menu screen appears on your television screen, press the remote’s 6, 7, 8, or 9 to select the Play Movie option, then press the remote’s BAND/7 or the receiver’s PLAY. The receiver begins playback.
Cautions:
•Do not move the DVD player during playback. Doing so may damage the disc and the unit.
•Use DISC 1, DISC 2, or DISC 3 on the main unit to open or close the disc trays. Do not push the disc tray while it is moving. Doing so may cause the DVD player to malfunction.
•Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to malfunc- tion.
•Keep your fingers well clear of the disc tray as it is closing. Keep children’s fingers away from the closing disc tray as there is a risk of personal injury.
•When the inhibit icon appears on the TV screen while a button is pressed, it means that the function is not available on the disc you are playing.
•.Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are play- ing.
Stopping Play
Press the receiver’s STOP or the remote’s FM MODE/'. When play is
stopped, the receiver remains at the point where the receiver’s STOP or the remote’s FM MODE/' was pressed, and H;IKC; appears.
Press the receiver’s STOP or the remote’s FM MODE/' again to stop. The resume option is cleared when the receiver’s STOP or the re- mote’s FM MODE/' is pressed the second time. Note: The resume op- tion is also cleared when the power is turned off and then on.
Press the receiver’s PLAY or the remote’s BAND/7 to resume the playback from this point.
Notes:
•The resume option works only with discs for which the elapsed playing time appears on the window display during playback.
•Opening the disc tray cancels the resume option.
•The resume option may not be available on some DVD discs.
Pausing Play
Press the receiver’s f or the remote’s MEMORY/ f.
To resume normal playback, press the receiver’s PLAY or the re- mote’s BAND/7.
Advancing by Frames
Press the receiver’s f or the remote’s MEMORY/ f while the DVD is paused. Each time you press the receiver’s f or the remote’s
RY/ f, the picture advances one frame.
To resume normal playback, press the receiver’s PLAY or the re- mote’s BAND/7.
Playing in Slow-Motion
Press the remote’s SLOW
To decrease the playback speed, repeatedly press SLOW
To reverse the playback direction, press to the playback di- rection. As you press the button the playback speed changes 1/2, 1/ 4, 1/8.
To return to normal playback, press the receiver’s PLAY or the re- mote’s BAND/7.
DVD Player Operation | 17 |