Controlling the Sleep Timer

Programming Tracks

This function allows you to program up to 32 tracks for playback in any desired order. This function only operates with audio CDs (not DVDs).

Note: The disc must be recognized by the receiver, so play the disc for a little while after loading, then program it.

1.Press FM MODE/ ' to stop the CD.

2.Press PROGRAM. &'ý¶ý¶ appears.

3.Repeatedly press DISC SKIP to select the desired CD (if neces- sary). The CD number appears to the far right of the display.

4.Press the appropriate numeric buttons, then press ENTER to pro- gram the first desired track.

5.Repeat Steps 2–4 to program more tracks.

To check the programmed order, press STOP twice. Repeatedly press 8or 9 to view the programmed order.

To clear the programming, press STOP twice, then press CLEAR.

Notes:

•If you try to select more than 32 tracks, FULL appears and you cannot program any more tracks.

•If you press PROGRAM twice successively while programming, the programming stops and F#E<< appears.

•Press BAND/7to start program playback.

Modifying the Program and Adding a Track

1.Press STOP twice. You cannot modify the programming in Resume Mode.

2.Repeatedly press 8 or 9 to select the desired programmed track.

To clear the track, press CLEAR.

To change the track to another track, press the numeric buttons, then ENTER.

To change the track to a track on another disc, press DISC SKIP, the numeric buttons, then ENTER.

To add a track, repeatedly press 8 or 9 until you reach the last programmed track. Press 8 or 9 again. Enter the appro- priate numeric buttons, then press ENTER to program the desired track.

3.To start program playback again, press PROGRAM, then BAND/

Note: The programmed contents are lost if you turn off the unit or change the function.

Random Play

Press RANDOM. The unit randomly selects trucks.

Note: Pressing RANDOM also clears any programming.

You can set the sleep timer to turn off the receiver after a set period of time.

Repeatedly press SLEEP to set the sleep timer to the desired time ('&, (&, )&, *&, +&, ,&, -&, .&, or /& minutes). The receiver turns off when the selected time has expired.

16	Remote Control Operation