Samsung WF520ABP/XAA manual Cleaning the debris filter

maintaining your washer

Cleaning the debris filter

We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.

1. Open the filter cover by pressing and pulling the handle	Filter cover
of the filter cover with your finger.

2. Holding the drain cap, pull the drain tube that	Step 1	Step 2
is hooked on the guide hook to the front.Do
not pull the drain tube with excessive force.
3. Place a bowl under the washing machine
to catch any remaining water. Then, hold	Drain cap
the drain tube with one hand, and turn the
emergency drain cap counter clockwise with
the other hand to separate it from the drain
tube.

4.Drain the remaining water completely.

5.Pull out the debris cap and debris filter assembly.

Debris filter cap

6.Wash any dirt or other material from the

debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.

Debris filter	Debris filter
cap

7.When you have finished cleaning the filter, insert the debris

cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o’clock position, pointing to the indicator on the washer.

8.Re-attach the emergency drain cap to the drain tube, and

then hook the tube to the hook guide.

9.Re-install the filter cover the filter cover.

30_ maintaining your washer

WF520AB-02838A-02_EN.indd 30

2010-09-01 �� 4:06:01