Samsung CM1319A/XEU Installation Instructions for Stacking Replacement of Lamp, EN Important

Page 10

Installation Instructions for Stacking

 

Replacement of Lamp

EN Important

1.Disconnect the power cord from the wall socket before attempting installation.

2.For stacking installation, you must use the “bracket plate” which is enclosed with this unit.

3.The maximum stacking height is two units.

Stacking the two units is limited to the following models.

CAUTION: Be sure the oven cavity is empty.

Installation

1.Stack two units together.

2.Remove 6 screws as shown in the figure.

3.Place the Bracket-plate to join the two units.

4.Attach and tighten 6 screws as shown in the figure here.

5.Ensure the top oven is at a safe and workable height.

Important

1.Remove a screw securing the lamp cover.

 You don’t need to remove outer panel to replace lamp.

2.Remove the lamp by rotating it clockwise.

3.Replace with a new lamp by rotating it counter-clockwise.

Lamp Cover

 

Lamp Hoder

 

Lamp

Outer Panel

(230 V 25 W)

Screw

Bracket-Plate

10

Image 10
Contents Microwave Oven Code No. DE68-02350BOven Using this Instruction BookletImportant Note Safety Precautiones Surface or shelf, movable trolley, table Installing Your Microwave OvenCooking / Reheating RecommendationsCM1919A CM1619A CM1319A Power Level Power Levels and Time VariationsOutput Stopping the Cooking Using +20sec PadTo stop the cooking Then Using the Defrost Feature Adjusting the Cooking TimeDefrost High or Defrost LOW as you wish Error Codes Erroe Items Code Error Beep Cause RemedyCleaning the Air Filter Cleaning the Microwave OvenCleaning the Ceiling Cover Care of Your Microwave OvenInstallation Installation Instructions for Stacking Replacement of LampEN Important Cookware Guide  Cooking Guide Frozen Chilled Recipe Method Power To cook 500gCooking Guide Cleaning Your Microwave Oven RICE, 500gOutput power Power sourcePower consumption Dimensions W x H x D
Related manuals
Manual 140 pages 11.72 Kb Manual 36 pages 14.77 Kb