Samsung VC21F50VNAB/SW, VCC4470S3R/XTR Power Control, Hose SC07F60J, SC08F60J, SC21F60J Series

POWER CONTROL

Remote-control type (SC08F60J, SC08F60Y, SC21F60J, SC21F60Y Series)

HOSE (SC07F60J, SC08F60J, SC21F60J Series)

1. ON/OFF ( ) Button

-Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

2. Suction ( - ), ( + ) Button

-Press the ( + ) button to operate the vacuum to highsuction power. Press the ( - ) button to operate the vacuum to low suction power.

(ON) MIN → MID → MAX

Handle Control

The cleaner is controlled by radio

frequency signals.

02 OPERATING THE CLEANER

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

HOSE (SC07F60Y, SC08F60Y, SC21F60Y Series)

1. ON/OFF ( ) Button

-Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.

2. SUCTION (-/+) Button

-Press the [SUCTION (-/+)] button to increase or decrease the suction power. Each time you press the button, you gradually increase the suction power. After the suction power reaches its maximum, the next time you press the button, you return the suction power to its minimum.

(ON) MIN → MID → MAX

Handle Control

The cleaner is controlled by radio

frequency signals.

3. BRUSH ON/OFF Button

-Press the [BRUSH ON/OFF] button to operate the UV Brush. Press again to stop the UV Brush.

If no button is pressed for 30 minutes while cleaning, the safety device is activated and the power is cut off. In this case, press the [Power] button on the main unit or unplug and then plug the power cord in again.

operating the cleaner _09