Samsung VCC7970V2W/UMG, VCC7930V3B/GEN, VCC7935V3K/XSG manual 2OPERATING the Cleaner, Power Control

2OPERATING THE CLEANER \\

2-1 POWER CORD

NOTE

Grasp the plug to disconnect cord from the electrical outlet.

2-3 POWER CONTROL

1)BODY-CONTROL TYPE

MIN = For delicate surface e.g. net curtains. MAX = For hard floors and heavily soiled carpets.

2)REMOTE-CONTROL TYPE

CONTROL-BUTTON RECEIVER

2-2 ON/OFF SWITCH

SENDER

POWER LAMP

Press control button repeatedly to select correct mode.

(STOP ➝ MIN ➝ MID ➝ MAX ➝ STOP)

INFRARED-CONTROL

When pushed the “ON/OFF” switch button, the Power lamp is turned on automatically.

ON/OFF switch button

2-4 AIR CONTROL

To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open.

BODY CONTROL TYPE ONLY

2-5 USING THE BLOWER

Located on the left rear side of the cleaner.

1) Disconnect the hose from the body of the cleaner.

2) Connect the hose clamper to the blow hole.

3