ROUTINE MAINTENANCE

Replacement of glow starter

A glow starter is located upper right side of the cabinet..

1. Disconnect the power supply plug.

2. Remove the glow starter and replace with a new

one.

Glow starter

3.Replace the water-proof rubber.

Cleaning of condenser filter

This unit is provided with the condenser filter at the bottom of the cabinet. Clean the filter once a month even since a clogged filter may cause shorter compressor life as well as the poor cooling.

Clean the filter by the procedure below.

1. Turn off the power switch.

2.Take out the condenser filter as shown in the figure.

3. Wash the filter with water and dry it naturally.

4. Replace the filter.

DISPOSAL OF UNIT

WARNING

If the unit is to be stored unused in an unsupervised area for an extended period ensure that children

do not have access and doors cannot be closed completely.

The disposal of the unit should be accomplished by appropriate personnel. Always remove doors to prevent accidents such as suffocation.

廢電池

請回收

This product has an electric battery.

Please recycle it for effective utilization of resources and protection of our environment. Thank you for your cooperation.

Label indication is obliged to comply with Taiwanese battery regulation.

21

Page 22
Image 22
Sanyo MBR-304DR instruction manual Disposal of Unit, Replacement of glow starter, Cleaning of condenser filter