Samsung DMB58AHC/AND, DM-B58AHC/XET Dimensions for Building in Appliances, List of Parts Supplied

Page 4

EN 2 / INSTALLING YOUR DISHWASHER

•DIMENSIONS FOR BUILDING IN APPLIANCES

You can insert your appliance under an existing worktop provided that the relevant niche corres- ponds to the dimensions on the sketch below (Fig. 01).

642 à 730 maxi

Fig. 1

•LIST OF PARTS SUPPLIED

3

Cups for front feet

Self-adhesive anti-condensation plate

Foam sound-proofing seal

Wrench for adjusting the front feet

Sound-proofing seals + self-adhe- sive fixing strips (if necessary)

Lower panel positioning screws

L = 75

Panel fixing screws

L = 40

Panel fixing screws

Screws for fixing the appliance to the unit

Drain connection collar

sounddamping seal

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Dishwasher Zmywarka do naczyń Makinenizin kurulması EN Contents Important Warnings Dimensions for Building in Appliances List of Parts SuppliedConnecting to the Water Supply Draining Away the Waste Water FIG Before connecting your appliance, ensure that Electrical ConnectionLevelling by Adjusting the Feet Insertion Into the NicheFitting the Door Panel Cladding with a single panel Fitting the Door Panel Cladding with 2 elements Fixing in the Niche SOUND-PROOFING SealsBalancing the Door Left and Right Appliances BUILT-IN Under a HOBRefitting the Plinth Table for Cutting Away the Plinth
Related manuals
Manual 32 pages 50.18 Kb
Top Page Image Contents