EN 2 / INSTALLING YOUR DISHWASHER
• ELECTRICAL CONNECTION
The appliance must be at a standstill when connecting to the electricity supply circuit.
Before connecting your appliance, ensure that:
- The mains voltage indicated on the manufac- turer’s plate on your machine matches the vol- tage supplied by your installation.
-Your meter and the fuses can support the current intensity for your dishwasher. A fuse of at least 10A is required.
We cannot be held responsible in the event of an accident or an incident caused by the lack of or by a defective Earthing system.
Your dishwasher complies with European Directives 73/23/EEC (Low Voltage Directive)
and 89/336/EEC (Electromagnetic Compatibility) as modified by Directive 93/68/EEC.
If you must connect your appliance to a diffe- rent voltage from that indicated on your machine, connect an appropriate transformer.
NB:
Use the services of a qualified electri- cian to make the modifications and ensure that your electrical installation complies with the regulations.
This appliance must necessarily be connec- ted directly to an earthed plug and socket.
In all cases, it must be connected in accor- dance with the prevailing regulations in the country concerned and any additional regula- tions from the local electricity utility.
Warning:
The plug and socket must be accessi- ble even after your appliance has been ins- talled.
The appliance must not be connected via an extension lead, a multiple socket or an elec- tric time delay programmer C .
C
•Replacing the power cable
Danger:
For your safety’s sake, this operation must only be performed by the manufactu- rer’s
•Appliances delivered without a plug
Danger:
The wires in your appliance’s power cable are coloured as follows:
- Green & Yellow | Earth |
- Blue | Neutral |
- Brown | Live |
If the cable’s colours do not match your plug, proceed as follows:
The wire coloured green and yellow must be connected to the connector in your plug mar-
ked with the letter E, the symbol 
or colou- red green and yellow.
The
The
7