Basic Features
¦¦ Changing the Picture Options
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
✎✎In PC mode, you can only make changes to Dynamic Contrast, Gamma, White Balance and LED Motion Plus.
Advanced Settings
Black Tone | : Off | ► |
Dynamic Contrast | : Medium |
|
Gamma | : 0 |
|
Expert Pattern | : Off |
|
RGB Only Mode | : Off |
|
Colour Space | : Native |
|
White Balance |
|
|
| ▼ |
|
| UMove E Enter | R Return |
■■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.
■■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
■■ Gamma: Adjust the primary colour intensity.
■■ Expert Pattern (Off / Pattern1 / Pattern2): By running the Expert Pattern function, the picture can be calibrated without a generator or filter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.
✎✎ While the Expert Pattern is running, sound is not outputted.
✎✎ Only enabled in DTV (except with a data service channel), Component and HDMI modes.
■■ RGB Only Mode (Off / Red / Green / Blue): You can adjust Colour or Tint (G/R) of Red, Green or Blue for the picture from an external device (DVD player, home theatre, etc.).
■■ Colour Space (Auto / Native / Custom): Adjust the range of colours available to create the image. To adjust Colour, Red, Green, Blue and Reset, set
Colour Space to Custom.
■■ White Balance: Adjust the colour temperature for a more natural picture.
Reset: Resets the White Balance to it’s default settings.
■■ 10p White Balance (Off / On): Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
✎✎ Available when the picture mode is set to Movie and when the external input is set to all input.
✎✎ Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
■■ Flesh Tone: Emphasize pink “Flesh Tone.”
■■ Edge Enhancement (Off / On): Emphasize object boundaries.
■■ xvYCC (Off / On): Setting the xvYCC mode on increases detail and colour space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.
✎✎ Available when the picture mode is set to Movie and when the external input is set to HDMI or Component.
✎✎ Some external devices may not support this function.
■■ LED Motion Plus (Off / Normal / Cinema / Ticke): Removes drag from fast scenes with a lot of movement to provide a clear picture.