Samsung HT-WQ20R/ELS manual Press DVD Receiver, Press TV/VIDEO

Page 11

Connecting the FM Antenna

FM Antenna (supplied)

Before Using Your Home Theater

Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

To Operate your Samsung TV and the Home Theater with the HT-WQ20/HT-TWQ22/HT-TWQ25's Remote Control

			Plug	the main unit's		Press	TV button to
	1		power cord into the			2 mode.set the remote to TV
	1		AC power supply.			2 mode.set the remote to TV

GB

1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2 Slowly move the antenna wire around until you find a location where reception is good, then fas- ten it to a wall or other rigid surface.

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

Note	• This unit does not receive AM broadcasts.

Press the POWER

3 button to turn on your Samsung TV with this remote.

Press DVD RECEIVER

5 button to switch to

DVD RECEIVER mode.

Press TV/VIDEO

4 button to select VIDEO mode on your TV.

VIDEO

Press FUNCTION button

6 on the main unit or DVD button on the remote to enable DVD/CD playback.

OPERATION

19

Note • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.	20
See page 67 for more information about remote control operation with other manufacturer's TVs.

Image 11

Contents AH68-01887B Preparation Safety Warnings PrecautionsGBContents This product does not support Secure DRM Media files Copy ProtectionSWA-3000 DescriptionMenu button Info button PL II Effect button Range of Operation of the Remote ControlTUNING/CH button Insert Remote BatteriesConnecting the Speakers Connecting the SpeakersConnect the front, center Connecting the Wireless Receiving AmplifierMethod 2 Scart ............... Better Quality Turn on the main unitMethod 1 Composite Video ............... Good Quality Progressive Scan Full Frame Connecting an External Analog ComponentPress Stop button Interlaced Scan 1 Frame = 2 FieldsPress TV/VIDEO Press DVD ReceiverSelecting the Video Format Disc terminologyPress OPEN/CLOSE button to open the disc tray Load a disc To stop playback, press Stop during playbackAppears on the TV screen MP3/WMA-CD PlaybackPress Info button Press To skip to the next slide Jpeg File PlaybackPlace the Jpeg disc on the disc tray DivX Playback Checking the Remaining Time Fast/Slow PlaybackSkipping Scenes/Songs Repeat Playback Zoom Screen Enlarge Function Step Function DVD VCDAngle Function DVD EZ View Function DVDPress Cursor 3 button or numeric Buttons to select the desired subtitlePress Cursor 2 button to move to Subtitle display Safe USB Removal To stop playback, press the Stop buttonTon ‘Title Menu’ Using the Title Menu DVDMoving Directly to a Scene/Song Language’ and then Press Enter button Setting the LanguageStop mode Press Menu button Select ‘Language’ Then press Enter buttonLetterbox Adjusting the TV Aspect Ratio Screen Size43LB 43PSButton Setting the PasswordStop mode Press Menu1PLAY/PAUSE button when an image you like appears Setting the Wallpaper Jpeg DVD VCDPower will turn off and then back on Press Menu but- ton to exit the setup screenPress the Menu Button while the disc tray is open DivX R registrationSetting Rear Surround Speakers Setting the Delay TimePress Cursor , to set the Delay time Setting Center SpeakerPress Menu Setting the Test ToneDisc mode Stop or noPress Sound Edit button Then press Cursor Setting the AudioTon.press Menu but Press SoundPress DSP/EQ button AV Sync SetupPress the Menu button Ton to select ‘MUSIC’ mode Dolby Pro Logic II ModePress PL II Mode button PL II Mode butTune in to the desired station Remote Control UnitPress TUNING/CH Listening to RadioPTY Program Type indication and PTY-SEARCH function What information can RDS signals provide?About RDS broadcasting Press Dimmer button To confirm the sleep timer setting, press Sleep buttonConvenient Functions Press Sleep buttonPoint the remote control toward the TV Press TV button to select TV modeWhen operating a TV with the remote control Press Power button to turn on the TVSymptom Check/Remedy Before Calling for ServiceProtection jacket Language Code ListKeep in a clean Do not keepSpecificationsGB HT-WQ20 Memo

Related manuals

Manual 39 pages 16.48 Kb

Manual 39 pages 8.64 Kb