Samsung HT-F450BK/SQ, HT-F453HBK/SJ Installing the Speakers on the Tallboy Stand, Front Speaker R

3 .

4 .

5 .

6 .

Connections

In case of HT-F450BK/HT-F450RK

Front Speaker (R)

VOLTAGE 115

SEL.

FA NET

(Only For Service)

Center Speaker
	Front Speaker (L)
SPEAKERS OUT	VIDEO
AUX IN 2	OUT
	FM ANT	HDMI OUT
	OPTICAL
	DIGITAL
SURROUND SUBWOOFER SURROUND	AUDIO IN

Surround Speaker (R)

Subwoofer

Surround Speaker (L)

Refer to page 11 for the speakers of HT-F453BK/F453RK/F453HBK/ F453HRK/ F455BK/F455RK.

Installing the Speakers on the Tallboy Stand

*HT-F453BK/HT-F453RK only - Front Speakers

*HT-F455BK/HT-F455RK only - Front/Surround Speakers

1 . Turn the Stand Base upside-down and connect it to the Stand.

2 . Use the driver to combine the screws on the 3 marked holes. CAUTION

When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

Straighten a supplied speaker wire to the gravity direction and put in the hole on the center of Stand Base. Connect the upper Speaker to the assembled Stand.

Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver. And then connect a speaker cable.

This is the appearance after the speaker is installed.Follow this steps to install other speaker.

1 Stand Base 2

Stand

34

Speaker

Stand

56

12 English