USB Function
Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product.
1 . Connect the USB device to the USB port on the front panel of the product.
2 . Press the FUNCTION button to select USB.
•USB appears on the display screen and then disappears.
3 . Press the ◄► buttons to select Videos, Photos or Music.
• Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.
•Press the YELLOW(C) button.
- REMOVE will appear on the display.
•Remove the USB cable.
NOTE
Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the USB port. The product will automatically turn off from no USB and Stop mode for more than 25 minutes.
USB Recording
While playing
Ex) USB recording of
1 . Connect the USB device to your product.
2 . Insert the
3 . Press the USB REC button on the remote control.
•To start recording the current track, press the USB REC button on the remote control while the system is playing a track or stopped temporarily.
•To record the entire CD, press and hold the USB REC button on the remote control.
-"FULL RECORDING" appears on the displayand recording starts.
4 . Press the 5 button to stop recording.
•When USB recording of a CD is completed, you will find a new folder named “RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.
•When USB recording of FM radio or AUX source is completed, you will find a new folder named “TUNER RECORDING or AUX RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.
NOTE
Do not disconnect the USB connection or the power cable during the USB Recording. Otherwise, it may cause damage to the data.
To stop USB Recording, press the 5 button and disconnect the USB device after the system stops playing the CD completely.
If you disconnect the USB connection during the USB Recording, the system will turn off and you will not be able to delete the recorded file.
If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.
If the recording duration is less than 5 seconds, a recording file may not be created.
USB Recording works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.)
The audio signal will not be output during USB recording of the CD in no MIC connecting state.Otherwise,The audio signal will be output during USB recording of the CD in MIC connecting state.
When Speaker selection is set to TV Speaker, the USB Recording function is not supported.
Disconnect the microphone to the set during recording, recording will be stopped.
The set will be started X3 recording when the Microphone doesn't connect to the set.
Any button except Stop /Volume/Mute/ Mic Volume button doesn't work during USB recording.
05 Basic Functions
English 23