Listening to Radio, Setting Mono/Stereo

Basic Functions

V SURROUND

It is only operational when 2 Channel Audio is playing. It will change 2 channel Audio Source to 5.1 channel Sound and there is output.

Each time you press the V-SURROUND button on the remote control in normal mode.

Virtual Surround on Virtual Surround off

•Virtual Surround on: change 2 channel audio to 5.1 channel and there is Sound output by 5.1 channel.

•Virtual Surround off: Output of 2 channel Audio is Sound output by 2 channel. (Original Sound).

TV SOUND

You can listen via Home Theater Speaker or TV Speaker with TV SOUND button.

1 . Connect the HDMI cable to TV and Home theater. 2 . Press the TV SOUND button on the remote

control.

3 . Each time you press the TV SOUND button, TV SOUND ON/OFF flashes shortly on the Display part on the Front panel, then change to D.IN.

-TV SOUND ON : Output to Home Theater

Speaker. -TV SOUND OFF : Output to Anynet+ connected TV Speaker.

Use in this case:

1)If you want to listen to the sound via home theater speaker when you watch a TV.

2)If you want to listen to the sound from the USB media that plugged to the TV via home theater speaker.

TV SOUND ON/OFF support specification

Listening to Radio

Using buttons on the Remote Control

1 . Press the FUNCTION button to select FM. 2 . Tune in to the desired station.

•Preset Tuning 1 : You must first add a desired frequency as a preset. Press the 5 button to select PRESET and then press the TUNING/CH (,.) button to select the preset station.

•Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING/CH (,.) button to tune in to a lower or higher frequency.

•Automatic Tuning : Press the 5 button to select MANUAL and then press and hold the TUNING/ CH (,.) button to automatically search the band.

Setting Mono/Stereo

Press the MO/ST button.

•Each time the button is pressed, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 in the memory 1 . Press the FUNCTION button to select FM.

2 . Press the TUNING/CH (,.) button to select <89.10>.

3 . Press the TUNER MEMORY button.

• Number flashes on the display.

4 . Press the TUNING/CH (,.) buttons to select preset number.

• You can select between 1 and 15 presets. 5 . Press the TUNER MEMORY button again.

Connected

Anynet+

(HDMI-CEC) supported

Anynet+

(HDMI-CEC)

non-supported

TV Anynet+	TV	TV
(HDMI-CEC) Sound Sound
Setting	ON	OFF
ON	O	O

OFF	O	O

No opeartion	O	O

•Press the TUNER MEMORY button before number disappears from the display.

•Number disappears from the display and the station is stored in memory.

6 . To preset another station, repeat steps 2 to 5.

Make sure that D.IN function is changed to TV CEC ON state,otherwise ARC audio is not available .

You can power on the set to press TV sound button on the remote control and to select ARC quickly.

22 English