Connections
3.Adjust the speaker height by fi tting it up to any of the provided holes. See the following examples for the speaker
height.
Hole 1: 650mm for the speaker height.
Hole 2: 635mm for the speaker height. (The default speaker height is 570mm)
4.Close the cover and tighten two screws as shown.
5.This is after the speaker height is adjusted.
Follow the steps above to adjust the speaker height at any time.
3 |
Hole 1 |
Hole 2 |
5 |
4 |
Connecting The Speakers
1.Press down the terminal tab on the back of the speaker.
2.Insert the black wire into the black terminal
3.Connect the connecting plugs to the back of the product by matching the
Colors of the speaker plugs to the speaker jacks. | Black |
Red
Connecting the wall mount
1.Connect the speaker cord with the color tube to (+), and the speaker cord without the color tube to
2.Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.
3.Fasten the screws to the wall, then hang the speaker on the wall.
Color tube
Front left speaker (L) : White
Front right speaker (R) : Red
Center speaker : Green
Surround left speaker (L) : Blue
Surround right speaker (R) : Gray
5 mm
4 mm
|
|
|
|
|
| 10 mm |
|
|
|
|
|
| |
30 mm |
|
|
| |||
|
|
|
| |||
Hold on the back of the speaker
8 to 10 mm
Depth of fastened screw