Samsung GN792IFXA/XET, GN952IFXA/XET, GN642FFXA/XET manual Installation Warning

Page 5

2.2Installation Warning

The appliance must be installed in accordance with the valid regulations and may only be used in a well- ventilated area.

Do not install this appliance on any type of marine vessel or Leisure Accommodation Vehicle.

Prior to installation, ensure that the gas and electrical supply complies with the type stated on the rating plate.

The gas pipe and electrical cable must be installed in such a way that they do not touch any part or the appliance.

Caution

This appliance should be installed by a qualified technician or installer.

The conditions for this appliance are stated on the label or data plate.

After unpacking the appliance, make sure the product is not damaged and that the connection cord is in perfect condition. Otherwise, contact the dealer before installing the appliance.

While in use, the adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 65 ˚C above the ambient temperature of the room the appliance is located in.

Remove all packaging before using the appliance.

GB 6

Image 5
Contents GN642FFXA GN792IFXA GN952IFXA Preface Safety warning ContentPreface If you think gas is leaking, proceed as follows Safety warningBelow signs have the following meaning Installation Warning Child and people safety Warning During use During use During use During use Caution Environmental information Cleaning & service WarningDescription of the appliance KnobBurner GN952IFXA / GN952IFXABChoose the burner properly for usage How to use the appliance BurnerFlame failure device How to turn on Turn onHow to turn off Turn off Safety and energy saving advice General Cleaning and maintenanceTop plate Pan support, control knobsCleaning and maintenance Burners Cleaning and maintenance Burners Problem Cause Solution TroubleshootingCustomer Care Web Site FAX no Address Remark Center TEL Application for serviceTechnical instructions Appliance class Class Appliance category II2L3B/P Technical data for engineersAppliance specifications Cutout size PositioningSpace to be left free around the appliance ISO Installing the applianceGas supplied by tank or cylinder butane/propane Gas connectionElectrical connection Gas conversion
Related manuals
Manual 30 pages 48.79 Kb Manual 29 pages 24.13 Kb