To display the time remaining for any of the cooking zones, use the Timer control sensor.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors ( or ). After the set period of time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates.
Count up timer
4.To cancel the timer settings, select the target burner and hold down the Timer control sensor for 2 seconds. This will cancel the burner’s timer settings with a beep. If holding down the Timer control sensor for 2 seconds without selecting a burner, this will cancel
the timer settings of the last changed burner.
NOTE
If you tap the Timer control sensor without selecting a cooking zone, the display turns on but no timer settings is applied.
NOTE
To change the settings quicker, touch and hold any of the or control sensors until the desired value is reached.
Hob
For the count up timer to be used, the appliance must be switched on but all the cooking zones must be not use timer as a safety shutoff.
1. Touch the Timer control sensor. will appear in the timer display.
use
English 35