Samsung GN642FFXD/XEU, GN642FFXD/XET, GN642FFXD/BOL manual How to Use the Appliance, Turn on

How to Use the Appliance

Turn on

1 Preparation

The following symbols will appear on the control panel, next to each control handle :

Circle : gas off

Large flame : maximum setting

Small flame : minimum setting

Ignition position

■The minimum setting is at the end of the anti-clockwise rotation of the control handle.

■All operation positions must be selected between the maximum and minimum position.

■The symbol on the control panel, next to the control handle will indicate which burner it operates.

2Ignition & Adjustment

■ Open the middle valve.

■Place a pot or a pan on the corresponding cooking position.

■Fully press down the control handle for the corresponding cooking position and turn it to the left, to the ignition position, and hold it there for a few seconds at most until the burner ignites.

■After igniting, keep the control handle pressed for about 5~8seconds more because the heat sensor that opens the gas channel has to warm up first. And set control handle to the position you want.

■If the burner does not light, repeat the process.

■The flame size can be set continuously between maximum and minimum by slowing turning the control handle.

■If the igniters are dirty, this makes the burner harder to light, so you should keep them as clean as possible. Do this with a small brush and make sure that the ignition device is not hit or knocked violently.

■The flame supervision device shall not be operated for more than 15s. If after 15s the burner has not lit, stop operating the device and open the compartment door and/or wait at least 1min before attempting a further ignition of the burner.

11