Samsung GN641FFXD/XEH, GN642FFXD/XEU, GN642FFXD/XET, GN642FFXD/BOL manual Positioning, Cut out size

	Positioning
	CLEARANCES REQUIRED				CLEARANCES REQUIRED
	WHEN FITTING THE HOB				WHEN FITTING THE HOB
WITHOUT A COOKER HOOD ABOVE					WITH A COOKER HOOD ABOVE
							600 mm
700 mm					700mm
		400mm		mm		400mm
							mm
			55
				400mm			55
								400mm
100	mm	560		mm	100mm
			mm					mm
				490		560	mm
								490
FO 0812					FO 0813

Cut out size

Width : 560mm

Depth : 490mm

Thickness : 30~50mm

■This appliance is to be built into a kitchen unit or 600mm worktop, providing the following minimum distances are allowed ;

-The edge of the appliance must be a minimum distance of 55mm from a rear wall.

-A minimum distance of 100mm must be left between the side edges of the appliance and any adjacent cabinets or walls.

-The minimum distance combustible material can be fitted above the appliance in line with the edges of the appliance is 400mm. If it is fitted below 400mm a space of 50mm must be allowed from the edges of the appliance.

-The minimum distance combustible material can be fitted directly above the appliance is 700mm.

	40mm
a	150mm (МАX)

- This panel(a) must be positioned at a maximum distance of 150mm below the worktop.

20