Samsung DW60J9970BB/EU manual Information Codes, Code Solution

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your dishwasher.

CODE	SOLUTION
	Over-level water check
OC	• Functional check. Close the water supply valve and go to your house circuit
	breaker panel, set the dishwasher’s circuit breaker switch to off , and then contact
	an authorized Samsung service centre.
	Leakage check
LC	• If a water supply valve connection leak occurs, close the water supply valve and
	go to your house circuit breaker panel, set the dishwasher’s circuit breaker switch
	to off, and then contact the installer to fi x.
	If the problem continues, contact an authorized Samsung service centre.
	Water supply check
4C	• Check if the water supply valve is closed, the water supply is suspended, or the
	water inlet valve or line is frozen or clogged by foreign particles.
	If the problem continues, close the water supply valve, and then contact an
	authorized Samsung service centre.
	Drain check
5C	• After closing the water supply valve, check whether the drain hose is clogged
	or folded. Also, check whether drain hole inside sump is clogged. If the problem
	continues, contact an authorized Samsung service centre.
	High temperature heating check
	• Functional check. With the dishwasher empty, add detergent, and then run a
HC	cycle.
	If the problem continues, go to your house circuit breaker panel, set the
	dishwasher’s circuit breaker switch to off, and then contact an authorized
	Samsung service centre.
	Pump operation check
3C	• Functional check. Turn off the dishwasher and start it again.
	If the problem continues, contact an authorized Samsung service centre.

For any codes not listed above, refer to the back of this manual and contact your Samsung Customer Service centre.

06 TROUBLESHOOTING

English - 33

BU_DW9000H-00159E-03_EN.indd 33 2016-05-11 ￿￿ 5:17:22