Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the 
button for more than 3 seconds
• When POWERbot is not used for 30 min.;
WARNING | SR10M70✴✴U✴ / SR20M70✴✴U✴ series: Turns to | |
SR10M70✴✴W✴ / SR20M70✴✴W✴ series: Automatically returns to the docking | ||
| ||
| station to be charged. |
Starting Auto clean mode
Press and release this button. The POWERbot moves and automatically cleans the set areas only once.
✻✻Stop cleaning: Press and release the 
button
Using Spot clean mode
The POWERbot cleans a localized area intensely.
Recharging
You can command POWERbot to recharge at the docking station automatically while it is cleaning by pressing this button.