Samsung VR10M703PW9/WA manual Charging, Using, Cleaning and maintenance, ENGLISH-30

Page 30

Notes and cautions

Charging

Note

ffIf the battery overheats during charging, it may take longer to charge.

ffWhen automatic charging is not working, do the following:

––Turn the emergency switch (on the bottom of POWERbot) off and on again.

––Unplug the docking station's power plug and then plug it back on.

––Unplug the docking station, and then check whether there is any foreign matter on the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag.

––Check for any obstacles such as reflective objects, chairs, etc. near the docking station.

ffIf POWERbot is left detached from the docking station, the battery will drain naturally.

––Try to keep POWERbot being charged on the docking station. (However, turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc.)

Using

Note

ffThe POWERbot may get caught on thresholds, etc. during cleaning.

––To restart operation, shut off the emergency switch, move the POWERbot to an area where it can move easily, and then turn on the power again.

ffThe POWERbot cannot completely clean

areas it cannot enter, such as corners, between the wall and sofa, etc.

––Please use another cleaning tool to clean them regularly.

ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning.

––Please use another cleaning tool to clean them regularly.

ffIf POWERbot is turned off, you cannot turn it on by pressing the Power button on the remote control. Press and hold the [Start/Stop] button on POWERbot.

ffYou cannot select and have the POWERbot execute Spot clean mode while it is charging.

ffIf you press Manual clean / Point cleaning button while charging, the POWERbot will be detached from the docking station and then turn into the standby mode.

Cleaning and maintenance

Note

ffIf you washed the dustbin and filter with water

––Dustbin: Completely wipe out the water.

––Filter: Completely dry it in the shade before using.

ffWhen cleaning the auto shutter tool, do not pull the auto shutter tool out too hard.

Caution

ffWatch your fingers when attaching or detaching the filter, since they may get stuck in the dustbin's intake.

ffTo avoid blockages by foreign matter, do not let the POWERbot vacuum up toothpicks, cotton swabs etc.

ffIf it is difficult to remove foreign matter from the brush, contact an authorized Samsung service center.

ENGLISH-30

Image 30
Contents POWERbot Using the remote control ENGLISH-02Safety information Other Symbols UsedENGLISH-03 Important Safety Instructions GeneralENGLISH-04 ENGLISH-05 ENGLISH-06 FfPlease prevent any risk of electric shock or fireENGLISH-07 Installation ENGLISH-08Accessories ENGLISH-09Charging Smart ChargingENGLISH-10 SR10M701 Series Check the installation status of the docking station whenManually charge the POWERbot when SR10M70 / SR2070 SeriesStarting Auto clean mode Using POWERbotTurning the power on/off Using Spot clean modeENGLISH-13 Auto clean Spot clean Manual clean Repeat cleanENGLISH-14 About the boundary markers ENGLISH-15Using the remote control ENGLISH-16Suction power Power / Recharging / Start/StopCleaning modes Additional functionOperating distance of the remote control Manual clean mode & Direction controlPoint cleaning ENGLISH-18Bottom Name of each partTop Display panelSR10M702 / SR10M703 series SR20M70 seriesENGLISH-20 Setting the schedule Setting time/scheduleSetting the time Type, B Type Only Auto clean mode can be scheduledType, D Type Only Auto clean mode can be scheduled ENGLISH-22ENGLISH-23 Cleaning the sensors and the camera Cleaning and maintainingCleaning the dustbin ENGLISH-24Cleaning the brush and Auto shutter tool Cleaning the Driving wheelENGLISH-25 Setting up the wireless router Samsung Connect AppENGLISH-26 Setting up a Samsung account Downloading the Samsung Connect AppENGLISH-27 Adding a device to the Samsung Connect APP ENGLISH-28Software Update Using the Samsung Connect APPENGLISH-29 Charging UsingCleaning and maintenance ENGLISH-30About the battery About the IrDA sensorENGLISH-31 Information codes ENGLISH-32Main PCB needs to be checked POWERbot is caught, stuck or trapped whileMoving around ENGLISH-33Troubleshooting POWERbot cannot findENGLISH-34 ENGLISH-35 WorkOpen Source Announcement ENGLISH-36Specifications SR10M70 seriesENGLISH-37 Memo ENGLISH-38ENGLISH-39 India
Related manuals
Manual 40 pages 24.02 Kb Manual 40 pages 60.55 Kb Manual 184 pages 2.99 Kb Manual 184 pages 42.75 Kb