Samsung NZ84J9770EK/EU manual Information code Possible cause Solution

Information code	Possible cause	Solution
C0	Check the Auto Cook sensor.	Restart the appliance using the Power
		button. If the problem continues,
C1	The temperature is sensed higher
		disconnect power for more than 30
	than specified.
		seconds. Then, restart the appliance and
C2	Check the Auto Cook sensor.
		try again. If the problem still continues,
		contact a local service center.
A2	The DC Motor fails to operate
	because of problems with the PCB
	or wiring, or electrical disturbance
	on the motor blade.
d0	The sensor is pressed for more	Check if the sensor pad is wet or pressed.
	than 8 seconds.	If the problem continues, restart the
		appliance using the Power button. If the
		problem still continues, contact a local
		service center.
F0	Communications between main	Restart the appliance using the Power
	and sub PCBs fail.	button. If the problem continues,
		disconnect power for more than 30
F2	The touch-enabled IC
		seconds. Then, restart the appliance. If
	communicates abnormally.
		the problem still continues, contact a local
		service center.

Warranty and service

English  45

NZ84J9770EK_EU_DG68-00630A-01_EN.indd 45

2015-01-30 ￿￿ 4:38:01