SHR-2040/2041/2042 USER’S MANUAL
Motion Detection Setup
●Motion Detection Mode
Off : Motion Detection does not operate
On : Motion Detection operates.
●Area
Selects the Motion Detection area. It is composed of 45x40(NTSC)/45x48(PAL) sized Block. It is impossible to set 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors.
❿Select All : Selects the whole area.
❿Select Block : Selects a block every time. Selection is done by a toggle system.
❿Select Quarter : Splits the whole area into 4 pieces, which enables selecting a fourth of the whole area.
❿Clear All : Cancels the whole area.
❿Save & Exit : Saves and exits.
❿Exit : Exits without saving.