Samsung SHR-2042P, SHR-2040PX, SHR-2040P/XEC manual Transfer Protocol Settings

Page 77

Transfer Protocol Settings

You may select either TCP or UDP for the protocol type.

If you select ADSL from the IP setup page, only TCP is available. While TCP is selected, Audio transmission is not available.

The available Port(TCP) ranges from 554 to 998 and the port number will be changed by 4. Once the first digit is determined, the following 3 digits will change accordingly.

The available Port(TCP) ranges from 8000 to 9760 and the port number will be changed by 160. Once the first digit is determined, the remaining digits will change accordingly.

Unicast is set to the default value and Multicast can be selected in Unicast / Multicast.

Multicast IP will be activated and its setup is available only when Multicast is selected from Multicast/Unicast.. Select a number from 224.0.0.0 to 239.255.255.255 for the D-Class IP address.

TTL will be also activated and the value from 0 to 255 can be set only when Multicast is selected from Multicast / Unicast. The default value is 5.

Note

If you want to connect IP Router with the main body of SHR-2040/2041/2042, you shall designate a port for SHR-2040/2041/2042 in the IP Router setup menu.

The main body of SHR-2040/2041/2042 uses 4 ports for TCP communication.

In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to the main body of SHR-2040/2041/2042, you shall designate a port for the IP which SHR-2040/2041/2042 has been allocated by the IP Router setup menu.

If you use IP Router, you are recommended to rather determine IP and Port numbers to be allocated to the main body of SHR-2040/2041/2042 from the IP Router setup menu, set the connection mode to Static IP for the main body of SHR-2040/2041/2042, and input the determined IP and Port number in IP Router than use the DHCP function.

Please refer to the IP Router User’s Manual or call the manufacturer to set up IP Router.

5-30

Image 77
Contents Real Time DVR Safety Regulations Data loss Disk failure Before we startContents REC Normal Recording Schedule Recording Event Recording 10-1 10-4 10-5 10-7 10-9 10-11 Overview 1Introduction 2Features 3Part Names and Functions Zoomtele ReverseRec LED Freezewide Fast / StepUSB USB Installation 1Installation Environment Setup 2Checking Product & Accessory 3HDD Addition HDD Addition ProcedureSHR-2041 SHR-2042 SHR-2040 SHR-2041/2042 BRACKET-HDD SHR-2040/2041/2042 USER’S Manual Cable SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual $ The cable should be out from the left hole Connecting with other device 1Connecting the Video, Audio, and Monitor SHR-2041/2042 2Connecting the Network Connecting to Internet through Ethernet10/100BaseT 3Connecting the USB Name Function 4Connecting the Alarm Input/OutputAlarm IN/OUT Connection 5Connecting the RS-485 Device Live 1System Operation Definition of Live Screen Icon 2Live screen ModeSplit Mode Definition of Live Screen ModePIPPicture In Picture Mode Auto sequence ModeSelecting Live Screen Mode Channel Selection and Audio On/Off Setup in the PIP Mode Audio On/Off Setup in the Full ScreenAudio On/Off Setup in the 4 Split Mode Zoom Function 4Freeze and ZoomFreeze Function 5Event Monitoring 6Spot-out monitoring Chapter Menu Setup Before Use 1System Date/Time/Language SetupOn DST Operation Password System Log Load Factory DefaultSystem Log List Event LogDevice Erase System Information and SetupUSB S/W Upgrade HDD Information HDD SetupExternal HDD Setup HDD End Beep HDD Mode SetupHDD End Mode Remote control Device System Shutdown 2Camera Camera ConfigSHR-2040/2041/2042 USER’S Manual Baurate PTZ DeviceProtocol Screen Setup OSG Display 3MonitoringSpot Out Channel Spot Out Event MonitorCH Support MonitorRecord Mode 4Recording ModeQuality RateAuto Deletion Record Video size ModeEvent Record Mode setup 5Event Record ModeEvent Record Mode setup Size Video SizeVideo size Video size is displayed at the bottom of left Post-EventBeep-Out Alarm Detection SetupAlarm-out Area Motion Detection SetupMotion Detection Mode Video Loss State Video Loss Detection SetupSensitivity 6Record Schedule Holiday Schedule / Event RecordBackup 7Backup8Network IP SetupGateway PasswordSubnet Mask Adsl User IDYou may select either TCP or UDP for the protocol type Transfer Protocol SettingsOn/Off Off is default but you may choose On Callback SettingsPort Setup for SmartViewer Connection 9Network SetupEvent of TCP Setup from Transfer Protocol Setup Event of UDP Setup from Transfer Protocol SetupChapter PTZ Camera Control PTZ Tele Wide View Preset 1PTZ Camera Control ModePage 2Basic Operation of PAN, TILT, & Zoom For AD Protocol PTZ Camera, this memorizes only 7 Presets 3Preset SetupSHR-2040/2041/2042 USER’S Manual 4Camera Menu Setup 5Preset View For example, Samsung Protocol 6Other ViewRecording 1REC Normal Recording 2Schedule Recording Event Recording Mode Alarm Detection3Event Recording Motion DetectionChapter Search and Play Before Use 1Calendar Search 2Event Search 3Date/Time Search 4Go to First Search 5Go to Last Search 6Backup 7Playback Definition Play Screen Mode Play at Faster Speed Chapter Smart Viewer 1Introduction 2Feature 3PC SpecificationRecommendation Smart Viewer Installation 4Smart Viewer InstallationSHR-2040/2041/2042 USER’S Manual Page 5Smart Viewer Program Execution 6Smart Viewer Initial Screen Connection Failure Cases 7Monitoring ModeMonitoring Mode Connection Screen SHR-2040/2041/2042 USER’S Manual Real-time with an icon Motion Detection SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Change Favorite at the set intervals SHR-2040/2041/2042 USER’S Manual @ Zoom in / OUT @ Sequence # Autopan $ Sort Page 8Search Mode Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual 9Setup Mode SHR-2040/2041/2042 USER’S Manual DVR Setup For the detailed items of DVR Setup, refer to Chapter Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page Ntsc PAL Ntsc PAL More than one camera should be selected to apply the alarm Page SHR-2040/2041/2042 USER’S Manual Page Viewer Setup 2040/2041/2042 SHR-2040/2041/2042 USER’S Manual Site Setup SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page SHR-2040/2041/2042 USER’S Manual Page Version SHR-2040/2041/2042 2040/2041/2042 Appendix Details Remarks 1Product SpecificationUSB HDD Details 2The specification of HDD and peripheral device 3Outline Drawings SHR-2042 YYYY-MM-DD 4Factory DefaultEvent Monitoring Ntsc Frame PAL Frame 6TroubleshootingFAQ Channel button does not operate in Live 10-13 AB68-00517B
Related manuals
Manual 93 pages 60.86 Kb Manual 207 pages 55.28 Kb Manual 207 pages 31.62 Kb Manual 93 pages 36.32 Kb Manual 93 pages 54.75 Kb Manual 207 pages 9.98 Kb Manual 178 pages 37.62 Kb Manual 93 pages 35 Kb Manual 93 pages 57.27 Kb Manual 184 pages 47.92 Kb Manual 96 pages 55.64 Kb