3. PRESET
This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand. A total of 128 presets are available.
Among the 128 PRESETS, PRESET 1: ALARM1, PRESET 2: ALARM2,
PRESET 3: ALARM3, PRESET 4: ALARM4,PRESET 5: set as special preset corresponding MOTION.
POSITION SET
From "POSITION SET..." press [ENTER] to get into the PAN/TILT, FOCUS/ZOOM SET screen
to set the PAN/TILT location and FOCUS/ZOOM condition then press [ENTER] to return to a higher menu.
PRESET ID
This is the ID set up function for each PRESET.
It can be set up to 12 characters using the left, right, up, and down keys. The ID location can be set in the submenu of "LOCATION..."
VIDEO SET
E
* * MAIN MENU * *
CAMERA SET...
VIDEO SET...
PRESET ...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
SYSTEM INFO...
➜
Press [Enter]
➜
Press [Enter]
(PRESET MAP)
0 | 1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 | 9 |
10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 |
20 | 21 | 22 | 23 | 24 |
25 | 26 | 27 | 28 | 29 |
3031 î ï RET ID:PRESET 0
PRESET NO.0 |
| |
|
| |
POSITION SET |
| ... |
PRESET ID | ON... | |
VIDEO SET | OFF | |
PRESET SPEED | 8 | |
DWELL TIME | 3S | |
IMAGE HOLD | OFF | |
This is the screen setting function for each PRESET.
Refer to the explanation under "VIDEO SET menu".
PRESET SPEED
This function sets up the speed of PAN or TILT by 8 steps from 1(SLOW) to 8(FAST).
-PRESET SPEED 1 : Maximum PAN moving speed of 240°/sec
-PRESET SPEED 8 : Maximum PAN moving speed of 400°/sec
DWELL TIME
This is a function setting for the DWELL TIME of the PRESET location in "SCAN" motion. It can set DWELL TIME From 1 ~ 60 Sec.
IMAGE HOLD
Pauses the image when PRESET is in movement, If you set the IMAGE HOLD menu to ON, the screen will be paused until PRESET finishes
EXITQUIT
❈Set the PRESET position at the TILT which ranges from 0° to 90°. Beyond this range, PRESET setup is not available.
❈When you try to set the Preset position by using the
moving.
EXIT
"QUIT" : Does not save the selected information and returns to a higher menu.
"SAVE" : Do saves the selected information and returns to a higher menu.
"DEL" : Deletes the selected information and restores the DEFAULT. Then returns to a higher menu.