Setting RS-422A/RS-485 termination
1 2
As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest.
Termination
SW1-ON
<RS-485 Half Duplex Organization>
Termination: using numbers 1 and 2 PIN, turn to ON and it will be terminated.
n < 32
Chapter 2 | SCC-C6405(P)Installation |
In this chapter, we will check the contents of the package before installing the SCC-C6405(P), and prepare a power adapter suitable for the power supply system.
(Power Consumption: 18W; Voltage: AC24V, 1.5A)
Then, we will install the SCC-C6405(P) and connect the cables.
<RS-422A/RS-485 Full Duplex Organization>
