Samsung SPR-9816P manual Setting Type, Alarm Out, Linked pTZ

Page 29

Alarm

This setup category covers sensor, camera, and alarm association settings. By associating a camera to a sensor, you can confi gure how long the camera is going to record for when a sensor event is detected. In addition, by associating an alarm output to a sensor, you can setup the alarm output to sound a warning signal when a sensor event is detected.

1

2

3

4

1

Setting

3

Type

 

Channel: Select the sensor you wish to confi gure.

 

Select the input type of the sensor.

 

Name:Enter the name of the sensor.

 

Click the button to switch between the NC and

 

Pre rec time: Select the time prior to a sensor event

 

NO option.

 

that the camera should record.

 

: Normally open, but closes when an event is

 

Post rec time: Select the time after to a sensor

 

 

 

detected (Normally Open).

 

event that the camera should record.

 

 

 

: Normally closed, but opens when an event is

 

Full Screen: Make the linked camera channels pop-

 

 

 

detected (Normally Close).

 

up full screen on the display screen

 

 

 

 

 

when a sensor event occurs.

4

Alarm Out

 

Dwell Time: This option is used to defi ne for how long

 

Channel: Select an alarm (Alarm Out) to associate

 

subsequent sensor event signals are

 

to the sensor (Alarm In).

 

ignored after an initial event signal. Enabling

 

Name: Enter the name of the alarm.

 

this option instructs the system to ignore

 

Dwell Time: Set how many seconds the alarm will

 

all other event signals transmitted by the

 

be active on a sensor event.

 

sensor for the set amount of time following

 

Alarm Out Button: Select a sensor channel to

 

the initial event signal. So once an event

 

associate to the alarm.

 

signal is transmitted, the set discard time

 

: Indicates an associated sensor.

 

must lapse before another event signal can

 

 

 

: Indicates a non-associated sensor.

 

be recognized.

 

2

Linked pTZ

 

 

 

Camera: Select the PTZ camera channel you wish

 

 

 

to associate to the sensor.

 

 

 

Preset: Select the PTZ preset for when the sensor

 

 

 

event is detected.

 

 

 

Spot Full up: Select the camera channel to be

 

 

 

displayed full screen on the spot

 

 

 

monitor in a sensor alarm event.

 

 

 

Dwell Time: Set the time that the camera is

 

 

 

displayed on the spot monitor.

 

 

 

 

 

 

05 SYSTEM SETUp

System Setup _25

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Digital Recording System WHAT’S Included with Your DVR Key features of your DVRSafety regulations Before start Operating TemperatureStandards Approvals System ShutdownContents Backup With the Panel Closed With the Panel Open PowerDVR Front View DVR Rear View Temperature Conditions InstallationChecking Installation Conditions Basic Connection Connecting with other devicesAlarm-In Connection Sensor Alarm-In ConnectionAlarm Connection Alarm Alarm-Out ConnectionRS485 Connection Network Connection Switch Hub 100MbpsEthernet/UTP Cable CAT5 Network Cable ConnectionExternal Keypad Connection POS Device Connection Live Watch Screen WatchCamera Channel Display Icons Login ScreenCAmERA Channel Disabling an Allocated Database Drive Database Drive AllocationAllocating a New Database Drive RESOURCE/PTZ/PLAYBACK/LOG Reallocating a Disabled DriveResource Tab PTZ TabLog Tab Playback TabTimeline Bar Audio output is only available for 1x forward playbackFull Screen Live Screen SwitchSequencing Button Click on the button to stop the cyclingChannel Video Playback Reset the video feed layoutCAmERA Channel ASSIGNmENT Channel PlaybackMoving Camera Picture Via View Panel ON-SCREEN KeyboardLaunching the On-Screen Keyboard Click on a video feed and drag to the desired locationSetup menu category buttons System SetupSystem Setup Basic Menu Camera Attribute HardwareCamera Covert Channel Setup PTZ SetupAdd to PTZ List PTZ modelAudio Audio SetupAudio Input Apply to Audio Link InfoSetting Type AlarmAlarm Out Linked pTZSpOT External monitorKeypad ID Keypad SetupExternal Keypad Port Setup POS SettingsList Transaction waitRecording RecordingSchedule Mode Recording mode button statesSchedule HolidaysCycle UpdateRange AddMotion Detection EventObject Watch Object Detection SettingsAction Settings Emergency AlarmMotion Video LossCamera Video LossDisplays the selected camera channel’s designa- tion Use BeepMail Search Mail Address manageUser List Group NameBackup Title BackupTime Setting Select the cameras you wish to backupNetwork Auto DNS Server SettingNetwork Ip Auto Allocation DhCpOptions AccountNetwork Stream Control Remote ResolutionUse Remote FrameEmergency monitor List Condition SettingRemote Address Emergency Stream Transfer TimeSYSTEm SetupUser ServerAdding a Group You can then verify the deletion Adding a User AccountDeleting a Group Verify that the user account has been removed from the list Deleting a User AccountSetting Log information Upgrading Software Click on the Open button to start the software upgradeImport/Export Path ButtonOverwrite Option Date/Time SetupDate/Time System Info SystemSearch Screen SearchTImELINE Search Date and TImESelection Screen Adjustment Split-Screen SetupPicture Quality Adjustment Search Screen PlaybackScreen Expanding/Shrinking the ScreenVideo Zoom-In Video move Video Zoom-OutPrinting Event SearchSearching Events Printing Search ScreenEvent List Advanced searchObject watch POSUsed as the play button to initiate Sequential Search Camera ButtonsPlayback panel Thumbnail Time Scale Up THUmBNAIL SearchThumbnail Time Scale Down Thumbnail SizeObject Detection window Object SearchClick the Search button to start the object Search Events List POS SearchProducts Backup Backup List Priority Up Backup mANAGEmENTPriority Down InformationUsing the System Recovery CD System RecoveryClick on the Reboot button AppendixSystem Recovery from the Hard Disk WebDVR Connecting to WebDVR Watch Search Date & Time WebDVR Search ScreenSPR Smart Viewer Viewer Installation Log/pTZ/playback Tabs Watch ScreenResource List Hard Drive SpaceDisconnecting from DVR Server Connecting to DVR ServerExit SPR Smart Watch Select the DVR you want to connect to from the server listSearch Date SearchServer List BookmarkPlayback Speed /Volume Control AdjustmentAllocating DVR Server to the Video Display Window Refreshes the timeline with the most recent recording dataE-map MapSaving/Cancelling Changes Setup menu category buttonsViewer Configuration Viewer Password ChangeColor Level Configuration Control servicesRemote Desktop Control To the server from a remote PCCategory SPR-9816 SPR-9716 SpecificationsOutline drawings TroubleshootingsFAQ Cause Colors or abnormal shapesConnected sensors are not working ProperlyWe protect your rights with two steps Open source license report on the productPreamble Appendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method Appendix Code of the Library into a program that is not a library Executable Foundation How to Apply These Terms to Your New LibrariesIf you develop a new library, and you want it to License, or at your option any later versionLoss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’ Correct disposal of batteries in this product
Related manuals
Manual 97 pages 23.32 Kb

SPR-9816P specifications

The Samsung SPR-9816P represents a notable advancement in the domain of high-quality surveillance technology, encapsulating a myriad of features that cater to both commercial and residential security needs. This cutting-edge model stands out due to its robust design and exceptional performance, which make it a reliable choice for users looking to enhance their surveillance systems.

One of the key features of the SPR-9816P is its high-resolution 4MP video quality, which guarantees crystal-clear imagery, enabling users to capture fine details even in challenging lighting conditions. This level of resolution is particularly beneficial for a wide range of applications, including retail environments, parking lots, and public spaces, making it easier to identify individuals and track movements.

Another notable characteristic of the SPR-9816P is its advanced night vision capabilities, thanks to the integration of infrared (IR) technology. This ensures that the camera delivers high-quality images even in total darkness. With a night vision range of up to 30 meters, users can maintain vigilance at all hours, providing unparalleled security coverage for their premises.

The camera also boasts a wide dynamic range (WDR) feature that enables it to handle high-contrast lighting environments. This technology balances the lighting, allowing users to see both bright highlights and deep shadows clearly, which is ideal for areas with mixed lighting situations, such as entrances and exits.

In terms of connectivity, the Samsung SPR-9816P supports Power over Ethernet (PoE), simplifying installation by allowing both data and power to run over a single cable. This feature not only reduces installation costs but also enhances the system's scalability, allowing for easy integration into existing networks.

Furthermore, the SPR-9816P includes intelligent video analytics capabilities, such as motion detection and tampering alarms, which enhance security by notifying users of suspicious activities in real-time. Additionally, the camera is equipped with a durable, weather-resistant housing, ensuring reliability and longevity in various environmental conditions.

In summary, the Samsung SPR-9816P combines high-resolution imaging, enhanced night vision, wide dynamic range capabilities, and advanced analytics in a robust design. These features make it a versatile solution for comprehensive surveillance needs, establishing it as a premier choice for those seeking superior security solutions in an ever-evolving landscape.
Top Page Image Contents