Samsung SPR-9816P manual Date/Time Setup, Overwrite Option

Date/Time

Confi gure the current date and time for your DVR system. Select the time zone for your current location and if you desire to set the time by synchronizing with a NTP (Network time protocol) server.

1

2

3

4

1	Date/Time Setup	3	Automatic Time Synchronization Settings
	Use to designate a time zone for the DVR sys-		This feature automatically synchronizes your
	tem and set the Current date and time.		system’s time with the NTP server.
	Date/Time: Use to update the system’s time and		Automatic Time Sync at Boot-up:
	date settings. Click on the Get internet		Synchronizes the system’s time with the NTP server
	time button to acquire the current time		every time the system restarts.
	from the NTP server. Clicking on the		Schedule time setting: Synchronizes the system's
	Update button applies newly confi gured		time with the NTP server at
	time as the system’s current time.		scheduled intervals.
	Time Zone: Select the time zone for your area.	4	Overwrite Option
	Click on the Update button to apply the
			When a Newly confi gured time is earlier than
	selected time zone to the system.
			the present system time, this option is used to
	Date Format: Select the date format that you wish
			decide whether or not to delete data recorded
	to use.
			between those two times. The fi rst option will
	Delimiter: Select a character to use for separating
	the day, month and year		overwrite the data recorded between those
2	Time Server		two times and updates the system time with
			the new confi guration. The second option
	Enter the address of the NTP server you wish
			does not overwrite data recorded previous to
	to synchronize with the DVR. Click on the Add
			the orignal time. The recording will commence
	button to register additional NTP servers. Click on
			again once the system time has realigned with
	the Remove button to remove a registered NTP
			the original system time.
	server addresses.

50_ System Setup