Setting the Sleep Timer
O | DE | TURBO | F |
| OF |
The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of six hours.
Note | If you wish to switch the unit off at a specific time, refer |
| to page 15. |
1If the 
indication is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears.
2 Press the 
button .
Result: ◆ | The indoor unit beeps. | |
◆ | The | indication is displayed. |
◆The air conditioner will be controlled as indicated in the illustrations below.
Cooling | The temperature is increased |
|
|
|
|
| by 1°C every hour. |
| 2¡C |
|
|
| When it has been increased |
| 1¡C |
|
|
| by 2°C (after two hours), the | Set |
|
|
|
| temperature is maintained for | TEMP. | 1hr | 2hr | 6hr |
| four hours. |
| Start |
| Stop |
|
| time |
| time | |
|
|
|
|
Setting the Quick Timer
The Quick Timer enables you to set the air conditioner to switch off automatically after a given period of time, by pressing one single button. The unit can be switched off automatically after 30 minutes, one hour, two hours, three hours or five hours.
Note | If you wish to switch the unit off at a specific time, |
| refer to page 15. |
|
|
1If necessary, switch the air conditioner on and select the required mode.
2 Press | OF | one or more times until the correct period is displayed: |
| F |
|
M
ODE
TURBO
OFF
Result: ◆ The TIMER indicator lights up yellow.
◆The air conditioner will switch off automatically when the
counter displayed on the remote control reaches 
.