Setting the Time
Your air conditioner contains a clock used to start and stop the unit automatically at a given time.
You must set the time when you:
◆Purchase the air conditioner
◆Replace the batteries
Note | Be sure to reset the time when you change clocks from |
| standard todaylight savings time and vice versa. |
Setting the Time for the First Time
1Insert the batteries.
◆Push the battery cover on the rear of the remote control with your thumb and remove it.
Result: The clock starts.
2Using a small pointed tool 
button.
Result: The AM indication flashes.
3To set the current time, press the 
or 
buttons under the cover on
the remote control.
To...Then...
Increase the time in
Press the (▲)button. Hold down the (▲)button. Press the (▼)button. Hold down the (▼)button.
Result: AM or PM is displayed to indicate whether the setting corresponds to a time before or after midday.
4When you are satisfied with your setting, confirm the time. To do so:
using a small pointed tool | button. | |
Result: | ◆ The AM or PM indication stops flashing. |
|
◆The clock starts.
Resetting the Time
If you have already set the time but wish to change it, proceed as follow.
1Using a small pointed tool 
button under the remote control flap.
Result: The AM or PM indication flashes.
2Set the time, following the instructions in Step 3 in the procedure above.
3When you are satisfied with your setting, confirm the time. To do so,
press the 
button, using a small pointed tool
Result: ◆ The AM or PM indication stops flashing.
◆The clock starts.