Replacement Parts and Accessories

If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your dryer or the SAMSUNG customer care center at 0330 SAMSUNG (7267864).

INSTALLATION

Gather the required tools and parts before starting the installation.

Read and follow the instructions provided with any tools listed here.

Tools and Parts

installing your dryer

Pliers

Cutting knife

Pipe wrench (gas only)

Nut drivers

Level

Phillips Screwdriver

Duct tape

Wrench

For proper installation, we recommend that you hire a professional. To install:

1.Move your dryer to an appropriate location for installation. Consider installing the dryer and washer side- by-side, to allow access to gas, electrical, and exhaust connections.

Lay two of the carton cushion-tops on the ﬂ oor. Tip your dryer on its side so it will lay across both cushion-tops.

2.Set your dryer back in an upright position.

3.To ensure that the dryer provides optimal drying performance, it must

be level. To minimize vibration, noise, and unwanted movement,the	Level
ﬂ oor must be a perfectly level, solid surface.
To set the dryer to the same height as the washer, fully retract the
levelling feet by turning them counterclockwise, then loosen the legs
by turning them clockwise

Retract fully

Then loosen

Adjust the levelling feet only as much as necessary to level the dryer. Extending the levelling feet more than necessary can cause the dryer

to vibrate.

Leveling feet

Samsung DV431AEP/XEU manual Replacement Parts and Accessories, Installation, Tools and Parts