troubleshooting
PROBLEM | SOLUTION |
|
|
Lint on clothes | • Make sure the lint fi lter is cleaned before every load. With some loads |
| that produce high amounts of lint, it may be necessary to clean the |
| fi lter during the cycle. |
| • Some fabrics are lint producers (for example, a fuzzy white cotton |
| towel)and they should be dried separately from clothes that are lint |
| trappers(for example, a pair of black linen pants) |
| • Divide larger loads into smaller loads for drying |
| • Check pockets thoroughly before washing and drying clothes. |
|
|
Garments still wrinkled after | • Small loads of 1 to 4 items work best. |
• Load fewer garments.Load | |
|
|
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY | MEANING | SOLUTION | |
|
|
| |
tE | Clogged Lint Screen | Clean the screen or vent. | |
Vent is restricted | If the problem continues, call for service. | ||
| |||
HE | Invalid heating Temp in running the | Call for service. | |
dryer | |||
|
| ||
|
|
| |
dE | Running the dryer with door open | Close the door and then restart. | |
If the problem continues, call for service. | |||
|
| ||
|
|
| |
dF | Door is not closing properly | Call for service. | |
|
|
| |
| Unit detects a button is being | Make sure a button is NOT being pressed | |
bE2 | pressed for over 30secs or button is | continuously. If the problem continues call for | |
| stuck | service. | |
|
|
| |
FE | Invalid power source Frequency | Try restarting the cycle. | |
If the problem continues, call for service. | |||
|
| ||
|
|
| |
AE | Electronic Control Problem | Call for service. | |
(Communication Error) | |||
|
| ||
|
|
|
For any codes not listed above, call 0330 SAMSUNG (7267864).