installing your dryer
DOOR REVERSAL
1.Cut off the power supply.
2.Remove two door hinge screws.
3.Lift the door and remove it.
8.Reinsert the screw in the other hole.
4.Remove a screw on the Frame Front
9.Reinsert the screw (Step 4) on the Frame Front
5.Remove the two screws on the opposite side of the door hinge.
10.Place the door on the other side and reattach it to the dryer.
6.Remove two screws from the holder lever.
11.Reattach the holder lever.
7.Remove a screw from the door hinge.
12.Reattach the screws in the remaing holes.