| ALTER WAVES QVL2GPFSS432 |
Page 2 of 2 | 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT, 4 LAMP, T8, 5 1/2’’ DEEP |
| MICROPERFORATED MESH DUAL LATERAL LAMP SHIELD |
Photometry
Ordering Information
Explanation of Catalog Number. Example: QVL2GPFSS43212004
QVL |
| 2 |
| G | ||
|
|
|
|
|
|
|
4
32
FAMILY | CEILING TYPE: | |
QVL: Quality Visual | G = Grid | |
Waves | LAMP SHIELD: | |
LUMINAIRE | ||
PF = Microperforated mesh | ||
WIDTH: | SD = Solid White | |
24” |
|
LAMP | VOLTAGE: |
QUANTITY | 120V |
4 | 277V |
| 347V |
| LAMP |
32 = 32W (T8 NOMINAL 48’)
OPTIONS:
F = Internal Fusing (consult factory)
N = Emergency lighting System (for U.S.)
O = Emergency Lighting System (for Canada)
R = Radio Interference Filter
SHIELD DETAILING
SS = Lateral Wave Side Shields
SR = Lateral Curved Side Shields
LPB: Number of lamps per ballast.
BALLAST:
OC = Magnetic T8
SO = 1 or 2 LPB electronic T8 IS SR = 1 or 2 LPB electronic T8 RS
PS = PowerSpec HDF Dimming Electronic T8 O4 = Electronic 4 LPB T8 IS
R4 = Electronic 4 LPB T8 RS
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by
Job Information |
| Type: |
|
|
|
Lightolier a Genlyte Thomas Company | www.lightolier.com | |
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508)
© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902