Samsung SP1055XWX/EN, SP1055XWX/ZX manual Connecting an AV device using a D-Sub cable

2-13 Connecting an AV device using a D-Sub cable

The appearance and the color may differ depending on the model.

Make sure that the AV device and your projector are turned off.

1.Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.

- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes".

2.Connect the [AV IN (L-AUDIO-R)] terminal at the back of the projector to the Audio out terminal of your AV device using an audio cable (Not supplied).

2-13 Installation and Connection