Lightolier VPA2G27PP332 Photometry, Ordering Information, Options & Accessories, Specifications

SECTION 2/Folio G05-30 REV. A

	VP PARABOLIC VPA2G27PP332
Page 2 of 2	2'x4' RECESSED FLUORESCENT, 4" DEEP, 27 CELL (3x9) PARABOLIC LOUVER
	STATIC OR AIR SUPPLY/RETURN, IES RP1 FOR INTENSE VDT USE (PREFERRED)

PHOTOMETRY

		LER = FP - 46.1			IW - 116.4				BF - 95.1
MODEL NO. VPA2G27PP332O3 Comparative yearly lighting energy cost per 1000 lumens = $5.20
		coefficients of utilization — zonal cavity method										(effective floor cavity reflectance 0.20)
			RF		20							20					20
		RC			80							50					30
		RW		70	50			30			50	30	10		50		30	10
		ratio	1	74	72			70			68	67	65		66		64	63
			3	65	60			56			57	54	52		56		53	51
			2	70	66			63			63	60	58		61		59	57
		cavity	4	61	55			51			53	49	46		51		48	46
			5	57	50			46			48	45	42		47		44	41
		room	6	53	46			41			45	41	38		44		40	37
			8	47	39			34			38	34	31		37		33	31
			7	50	42			38			41	37	34		40		37	34
			9	44	36			32			35	31	28		34		31	28
			10	41	34			29			33	29	26		32		28	26
		visual comfort probability					(rated lumens per lamp 3150.)
		room size						ceiling height							ceiling height
		W		L	8.5			10.0		13.0	16.0			8.5	10.0	13.0	16.0
		20		20			89		95	92	83			97	97	97	90
	20			30			90		95	93	83			97	97	97	91
	20			40			90		95	93	83			97	97	97	91
	20			60			90		95	93	83			97	98	97	91
		30		20			90		95	93	86			97	97	97	92
	30			30			90		95	93	86			97	98	97	92
	30			40			90		95	93	86			97	98	97	92
	30			60		lengthwise	90		95	93	87		crosswise	97	98	97	92
	40			40			90		95	93	87			97	98	97	92
	30			80			90		95	93	87			97	98	97	92
		40		20			90		95	93	86			97	97	97	92
	40			30			90		95	93	86			97	98	97	92
	40			60		luminaries	90		95	93	87		luminaries	97	98	97	92
	40			80			90		95	93	87			97	98	97	92
	40			100			90		95	93	87			97	98	97	92
		60		30			90		95	93	86			97	98	97	92
	60			40			90		95	93	87			97	98	97	92
	60			60			90		95	93	87			97	98	97	92
	60			80			91		95	91	87			97	98	97	92
	60			100			91		95	91	87			97	98	98	93
		100		40			90		95	93	87			97	98	97	92
	100			60			91		95	91	87			97	98	97	92
	100			80			91		95	91	87			97	98	98	93
		100		100			91		95	91	87			97	98	98	93

ORDERING INFORMATION

Explanation of Catalog Number. Example: VPA2G27PP332120O3GLR

VP

2 27 P P

3

BODY STYLE:

A=Air Handling

S=Static

VP:

4" Deep Pre-

anodized

Aluminum

Louver

For Intense

VDT Use

	CEILING TYPE:		LOUVER
	G= Grid		FINISH*:
	(lay-in T bar)		P=Low
FIXTURE	F=Flanged	NUMBER OF	Iridescence	DUAL “V”
	(overlap)		Specular
WIDTH	Z spline and	CELLS:		REFLECTORS
		(3 rows of

plaster frame	9 cells)
T=Slot grid or
two-directional
concealed T
(see options)

LAMP

QUANTITY

LAMP TYPE/

FIXTURE

LENGTH: 32=T8

34=T12 (Nominal 48")

VOLTAGE:	OPTIONS:
120 or 277	Add appropriate
	suffix to catalog
	no, ie: (GLR)
BALLAST TYPE:
1 & 2 Lamp Mag. T12	LE	<10THD
	<20THD
1 & 2 Lamp Elec. T8	SO*	HI*
1-3 Lamp Elec. T8	O3*	H3*
LOL T8 Dimming	PS	–

*Instant Start Standard

Other dimming options consult factory.

OPTIONS & ACCESSORIES

PLASTER FRAME: Catalog Number: PF24.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half-width flanges are

required between fixtures. Order Catalog Number: S2FCTRIM (each joint).

SPLAY TRIM: For T ceiling type only. SUFFIX: CTZ24 S2 SPLAY TRIM.

RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture

standard. SUFFIX: RF.

ELECTRICAL/WIRING OPTIONS: Consult factory.

AIR CLOSURE STRIPS: SUFFIX ACS4 (factory installed).

DRYWALL KIT: Order Catalog Number: FK92X4. Request Folio OA30-10.

CHICAGO PLENUM: SUFFIX: CP.

SPECIFICATIONS

PERFORMANCE: In an installation of 3 lamp 32W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .72 with a spacing to mounting ratio of 1.5 perpendicular to the lamps. To meet IES RP1 preferred requirements for VDT areas the VCP (visual comfort proba- bility) shall not be less than 90 either crosswise or lengthwise and the maximum average brightness at 55°, 65°, 75° and 85° shall not exceed 745, 0, 0 and 0 can- delas per square meter respectively in the 0°, 45°, and 90° horizontal planes.

AIR HANDLING: (VPA only) side air passages for air supply or air return. Supply air is discharged vertically. Optional side closure strips. Air return is also provided through the lamp compartment through fixture body ends.

SPECIFICATIONS (continued)

MATERIALS: Chassis parts are die formed code gauge cold rolled steel. Housing side rails hemmed over and housing ends turned-in for safe handling. Louver is pre-anodized aluminum (Coilzak® or equal).

FINISH: Chassis exterior–black baked polyester enamel. Cavity–white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. Louver–low iridescence specular anodized vertical grain aluminum reflector sheet is standard.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902